Current–voltage characteristics of focused ion beam fabricated superconducting tungsten meanders
Nanotechnology · 01.01.2024 · 35 (1) · 015705
DOI: 10.1088/1361-6528/acffcf ↗Kurz gefasst
Fachartikel in der Zeitschrift Nanotechnology, online erschienen am 19.10.2023. Verfasst von Abhishek Kumar und 7 weiteren Autor:innen. Beteiligte Einrichtung: Quantum Nanophotonics Metrology Division, CSIR-National Physical Laboratory, Dr K. S. Krishnan Marg, New Delhi 110012, India. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 64 Literaturangaben. Gefördert von: Project Funding.
Abstract (Originalsprache)
We report on the superconducting properties and intermediate resistive steps (IRS) observed in the current–voltage characteristics (IVC) of tungsten meander (MW) structures fabricated using focused ion beam (FIB) technique. Three number of MWs were studied with individual wire widths of 240 nm, 640 nm and 850 nm with superconducting transition temperatures ( T C ) of 4.5 K, 4.55 K and 4.60 K respectively. The measured normal state resistance values at 8 K for these wires are of ∼182 kΩ, ∼49 kΩ and ∼32 kΩ, respectively as a function of increasing wire widths; are higher than the quantum of resistance ( h / 4 e 2 = 6.45 k Ω , h is a Planck constant and e is electronic charge) indicating extreme disorder nature of the fabricated samples. The variation of resistance with respect to temperature (for T < T C ) follows the theoretical simulation of weak-link induced thermally activated phase slip (WL-TAPS) for the MW wire of width ∼240 nm, while for other samples the convergence between WL-TAPS and the experimental data are not so satisfactory. Though the IRS features are present in all the samples with varying degree of prominence, an external magnetic field causes its evolution demarcating different boundary lines with respect to temperatures. Herein, we believe that the occurrence of IRS is due to phase slip (PS) mechanism which further proliferates through phase slip centers or phase slip lines in IVC either with respect to temperature or magnetic field. As per our knowledge, such IRS features are not being reported for W-meander wires fabricated using FIB technique. The observation of PS (IRS) features is promising for the use of FIB fabricated W nanowires for various quantum applications including single photon detector, bolometers.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Quantum Nanophotonics Metrology Division, CSIR-National Physical Laboratory, Dr K. S. Krishnan Marg, New Delhi 110012, India.
- Academy of Scientific and Innovative Research (AcSIR), Ghaziabad 201002, India.
- Low Temperature Laboratory, UGC-DAE Consortium for Scientific Research, University Campus, Khandwa Road, Indore 452001, India.
ORCID-Profile: Abhishek Kumar, Sudhir Husale, Majid Yousuf, Mahesh Gaurav Yadav, R P Aloysius
Förderung
- Project Funding
Zitieren
APA
Kumar, A., Husale, S., Saravanan, M. P., Gajar, B., Yousuf, M., Saini, A., Yadav, M. G., & Aloysius, R. P. (2024). Current–voltage characteristics of focused ion beam fabricated superconducting tungsten meanders. Nanotechnology, 35(1), 015705. https://doi.org/10.1088/1361-6528/acffcf
Vancouver
Kumar A, Husale S, Saravanan MP, Gajar B, Yousuf M, Saini A, et al. Current–voltage characteristics of focused ion beam fabricated superconducting tungsten meanders. Nanotechnology. 2024;35(1):015705. doi:10.1088/1361-6528/acffcf
BibTeX
@article{Kumar2024,
author = {Kumar, Abhishek and Husale, Sudhir and Saravanan, M P and Gajar, Bikash and Yousuf, Majid and Saini, Abhilasha and Yadav, Mahesh Gaurav and Aloysius, R P},
title = {Current–voltage characteristics of focused ion beam fabricated superconducting tungsten meanders},
journal = {Nanotechnology},
year = {2024},
volume = {35},
number = {1},
pages = {015705},
doi = {10.1088/1361-6528/acffcf}
}
EUVIMED