EUVIMEDEUVIMED entdecken
Crossref

Structural optimization, degradation behavior and mechanical properties of Mg–2Zn–1Mn alloy bone plates based on a stress corrosion prediction model

Chuanping Guo, Shuhui Han, Peng Liu, Chenchen Shi, Yang Qiao

Modelling and Simulation in Materials Science and Engineering · 15.12.2026 · 34 (8) · 085002

DOI: 10.1088/1361-651x/aebdb3 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Modelling and Simulation in Materials Science and Engineering, online erschienen am 12.11.2026. Verfasst von Chuanping Guo und 4 weiteren Autor:innen. Die Arbeit nennt 50 Literaturangaben. Gefördert von: Natural Science Foundation of Shandong Province, The Disciplinary Interdisciplinary Convergence Construction Project of University of Jinan in 2024.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Degradable magnesium alloy bone plates have considerable potential for fracture fixation because of their excellent biocompatibility and mechanical compatibility. However, in physiological environments, they are susceptible to the combined effects of corrosive media and service loads, which may lead to localized corrosion, stress corrosion cracking, and the progressive deterioration of mechanical properties, thereby compromising the stability and safety of the implant. Therefore, rational control of the degradation rate and improvement of service reliability are of great significance. In this study, an Mg–2Zn–1Mn magnesium alloy bone plate was investigated. Based on a previously established and calibrated pitting corrosion–stress corrosion coupling model, the key structural parameters of the bone plate, including geometry, hole spacing, hole diameter, and thickness, were optimized. The results showed that the combination of type (b) geometry, a hole spacing of 9.0 mm, a hole diameter of 3.4 mm, and a thickness of 3.25 mm provided the best overall performance. Compared with the original design, the mass loss of the optimized bone plate after 36 h decreased from 40.09% to 29.41%, while its bending yield strength increased from 276 MPa to 305 MPa. No simulated structural failure occurred during the degradation process. These findings demonstrate that optimizing key structural parameters can effectively enhance the service performance of degradable magnesium alloy bone plates.

Förderung

  • Natural Science Foundation of Shandong Province
  • The Disciplinary Interdisciplinary Convergence Construction Project of University of Jinan in 2024

Zitieren

APA

Guo, C., Han, S., Liu, P., Shi, C., & Qiao, Y. (2026). Structural optimization, degradation behavior and mechanical properties of Mg–2Zn–1Mn alloy bone plates based on a stress corrosion prediction model. Modelling and Simulation in Materials Science and Engineering, 34(8), 085002. https://doi.org/10.1088/1361-651x/aebdb3

Vancouver

Guo C, Han S, Liu P, Shi C, Qiao Y. Structural optimization, degradation behavior and mechanical properties of Mg–2Zn–1Mn alloy bone plates based on a stress corrosion prediction model. Modelling and Simulation in Materials Science and Engineering. 2026;34(8):085002. doi:10.1088/1361-651x/aebdb3

BibTeX
@article{Guo2026,
  author = {Guo, Chuanping and Han, Shuhui and Liu, Peng and Shi, Chenchen and Qiao, Yang},
  title = {Structural optimization, degradation behavior and mechanical properties of Mg–2Zn–1Mn alloy bone plates based on a stress corrosion prediction model},
  journal = {Modelling and Simulation in Materials Science and Engineering},
  year = {2026},
  volume = {34},
  number = {8},
  pages = {085002},
  doi = {10.1088/1361-651x/aebdb3}
}
Kostenlos starten →