Atomic-scale analysis of drawing behavior in FeNiCr alloys with different crystal orientations and Bi inclusions
Modelling and Simulation in Materials Science and Engineering · 30.04.2026 · 34 (3) · 035023
DOI: 10.1088/1361-651x/ae5cb8 ↗Kurz gefasst
Fachartikel in der Zeitschrift Modelling and Simulation in Materials Science and Engineering, online erschienen am 17.04.2026. Verfasst von Haochen Wang und 6 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben. Gefördert von: Shaanxi Provincial Key Research and Development Program.
Abstract (Originalsprache)
This study employed molecular dynamics (MD) simulations to investigate the effects of crystal orientation and bismuth nanoparticles on the mechanical properties and microstructure of FeNiCr alloy during drawing. MD models of single-crystal FeNiCr alloy with four crystal orientations—[100], [110], [120], and [210]—were established for drawing simulations. Based on single-crystal drawing deformation data, drawing processes were simulated for polycrystalline FeNiCr alloys with predominant grain orientations of [100], [110], [120], and [210]. Finally, drawing simulations were conducted for polycrystalline FeNiCr alloys with [110] as the predominant grain orientation, incorporating Bi particles as inclusions. Results indicate that the [110] orientation exhibits superior drawing properties in both single-crystal and polycrystalline models: The [110] single crystal exhibits the smallest fluctuations and lowest peak axial drawing force, significantly lower shear strain values than other orientations, and an ‘X’-shaped arrangement of stacking faults. In tensile testing, the [110] orientation exhibits the lowest peak stress. After reaching peak stress, the stress does not show a significant drop but continues to fluctuate. The [110]-dominant polycrystalline FeNiCr alloy shows a lower peak axial drawing force, and the fluctuation is the smallest. The atomic increment of HCP is significantly higher than that of polycrystalline FeNiCr model with other grain orientations. Shear strain is primarily concentrated at grain boundaries and remains at a low level, indicating excellent plastic deformation capability. Furthermore, bismuth particle inclusions absorb dislocation energy and undergo self-deformation, thereby further reducing the axial drawing force of the [110]-dominant polycrystalline FeNiCr alloy and enhancing the material’s plastic deformation capacity. This study elucidates the mechanism of crystal orientation and bismuth elements during the tensile process of FeNiCr alloys, providing a theoretical basis for developing environmentally friendly free-cutting steels.
Förderung
- Shaanxi Provincial Key Research and Development Program
Zitieren
APA
Wang, H., Wang, F., Li, X., Yu, L., Zhang, H., Cai, Y., & Zhao, X. (2026). Atomic-scale analysis of drawing behavior in FeNiCr alloys with different crystal orientations and Bi inclusions. Modelling and Simulation in Materials Science and Engineering, 34(3), 035023. https://doi.org/10.1088/1361-651x/ae5cb8
Vancouver
Wang H, Wang F, Li X, Yu L, Zhang H, Cai Y, et al. Atomic-scale analysis of drawing behavior in FeNiCr alloys with different crystal orientations and Bi inclusions. Modelling and Simulation in Materials Science and Engineering. 2026;34(3):035023. doi:10.1088/1361-651x/ae5cb8
BibTeX
@article{Wang2026,
author = {Wang, Haochen and Wang, Fazhan and Li, Xiaopeng and Yu, Lujia and Zhang, Haizhou and Cai, Yumeng and Zhao, Xinyang},
title = {Atomic-scale analysis of drawing behavior in FeNiCr alloys with different crystal orientations and Bi inclusions},
journal = {Modelling and Simulation in Materials Science and Engineering},
year = {2026},
volume = {34},
number = {3},
pages = {035023},
doi = {10.1088/1361-651x/ae5cb8}
}
EUVIMED