Cross slip of extended dislocations in face-centered cubic metals through phase-field modeling
Modelling and Simulation in Materials Science and Engineering · 31.07.2025 · 33 (5) · 055011
DOI: 10.1088/1361-651x/ade31f ↗Kurz gefasst
Fachartikel in der Zeitschrift Modelling and Simulation in Materials Science and Engineering, online erschienen am 19.06.2025. Verfasst von Ian Wise und 2 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Foundation, U.S. Department of Energy, Office of Naval Research.
Abstract (Originalsprache)
Cross slip is a dislocation mechanism that significantly impacts the mechanical behavior of engineering alloys. Here, we advance a 3D phase-field dislocation dynamics (PFDD) mesoscale technique to simulate cross slip across a broad range of face-centered cubic (FCC) metals. The formulation incorporates elastic anisotropy, an FCC numerical grid, and a high-fidelity representation of the entire γ -surface from density functional theory for eight FCC metals and no adjustable parameters or rules. The relaxed core structures under zero stress for all metals are predicted to extend in plane. The analytical model for stacking fault width agrees well with the PFDD result under the assumption of elastic isotropy but overestimates it under elastic anisotropy, when the degree of anisotropy is large. The dynamic simulations are designed to elucidate the material parameters that influence the propensity for cross slip. Whether cross slip occurs under a non-Schmid stress or to bypass a hard obstacle, the critical stress to cross slip scales strongly with the anisotropic energy coefficient for a screw dislocation.
Förderung
- National Science Foundation
- U.S. Department of Energy
- Office of Naval Research
- University of California Research Initiatives
Zitieren
APA
Wise, I., Hunter, A., & Beyerlein, I. J. (2025). Cross slip of extended dislocations in face-centered cubic metals through phase-field modeling. Modelling and Simulation in Materials Science and Engineering, 33(5), 055011. https://doi.org/10.1088/1361-651x/ade31f
Vancouver
Wise I, Hunter A, Beyerlein IJ. Cross slip of extended dislocations in face-centered cubic metals through phase-field modeling. Modelling and Simulation in Materials Science and Engineering. 2025;33(5):055011. doi:10.1088/1361-651x/ade31f
BibTeX
@article{Wise2025,
author = {Wise, Ian and Hunter, Abigail and Beyerlein, Irene J},
title = {Cross slip of extended dislocations in face-centered cubic metals through phase-field modeling},
journal = {Modelling and Simulation in Materials Science and Engineering},
year = {2025},
volume = {33},
number = {5},
pages = {055011},
doi = {10.1088/1361-651x/ade31f}
}
EUVIMED