EUVIMEDEUVIMED entdecken
Crossref

Refraction-aware calibration and rectification for accurate underwater stereo 3D reconstruction

Jinhua Zhang, Chao Gao, Rui Chen, Yuqi Liu, Wenpan LI, Wenlong Li

Measurement Science and Technology · 16.11.2026

DOI: 10.1088/1361-6501/aec286 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Measurement Science and Technology, online erschienen am 16.11.2026. Verfasst von Jinhua Zhang und 5 weiteren Autor:innen. Gefördert von: Central Guided Local Science and Technology Development Fund Project of Hubei Province, Fundamental and Interdisciplinary Disciplines Breakthrough Plan of the Ministry of Education of China, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Accurate underwater stereo 3D reconstruction remains challenging for sealed binocular cameras, because refraction through flat viewing windows violates the central projection and linear epipolar geometry assumptions underlying conventional calibration and rectification methods. This paper presents a refraction-aware calibration and rectification framework for underwater stereo 3D reconstruction. The framework adopts an explicit 
multilayer refraction model to represent the non-central imaging geometry caused by “air-glass-water” refraction. Based on this model, a two-stage air-water calibration strategy is developed, in which the intrinsic and stereo extrinsic parameters are calibrated in air, while the refraction-related parameters, including air-layer thicknesses and glass normal directions, are estimated underwater using multi-objective physical constraints. To enable accurate stereo matching, a depth-range-constrained rectification method is proposed to remap nonlinear refractive correspondence curves into approximately horizontal correspondences within the working range. The resulting disparities are then converted into metric underwater point clouds through refractive ray back-projection and closest-ray triangulation. Experiments were conducted using a self-developed sealed underwater binocular sensor on a water-tank platform. Standard ball-bar measurements and comparisons with structured-light reference scans were performed to assess reconstruction accuracy. Within the 400–600 mm working range, the standard ball-bar experiment achieved an average absolute length error of 0.9580 mm, while comparisons with structured-light reference scans yielded RMSE values of 0.8345 mm and 0.6022 mm for two anchor-chain components. These results demonstrate that the proposed framework provides an accurate geometric foundation for millimeter-level underwater stereo 3D reconstruction.

Förderung

  • Central Guided Local Science and Technology Development Fund Project of Hubei Province
  • Fundamental and Interdisciplinary Disciplines Breakthrough Plan of the Ministry of Education of China
  • National Natural Science Foundation of China
  • National Major Science and Technology Projects of China

Zitieren

APA

Zhang, J., Gao, C., Chen, R., Liu, Y., LI, W., & Li, W. (2026). Refraction-aware calibration and rectification for accurate underwater stereo 3D reconstruction. Measurement Science and Technology. https://doi.org/10.1088/1361-6501/aec286

Vancouver

Zhang J, Gao C, Chen R, Liu Y, LI W, Li W. Refraction-aware calibration and rectification for accurate underwater stereo 3D reconstruction. Measurement Science and Technology. 2026. doi:10.1088/1361-6501/aec286

BibTeX
@article{Zhang2026,
  author = {Zhang, Jinhua and Gao, Chao and Chen, Rui and Liu, Yuqi and LI, Wenpan and Li, Wenlong},
  title = {Refraction-aware calibration and rectification for accurate underwater stereo 3D reconstruction},
  journal = {Measurement Science and Technology},
  year = {2026},
  doi = {10.1088/1361-6501/aec286}
}
Kostenlos starten →