Capacitive diagnostic sensor embedded in an electrostatic chuck for real-time plasma density measurement
Measurement Science and Technology · 30.10.2026 · 37 (43) · 435101
DOI: 10.1088/1361-6501/aeb27d ↗Kurz gefasst
Fachartikel in der Zeitschrift Measurement Science and Technology, online erschienen am 30.10.2026. Verfasst von Chang Hee Lee und 13 weiteren Autor:innen. Die Arbeit nennt 17 Literaturangaben. Gefördert von: Korea Evaluation Institute of Industrial Technology.
Abstract (Originalsprache)
In plasma processes for semiconductors and displays, the need for real-time diagnostics of plasma conditions for precise process control continues to increase. Consequently, methods that operate in real process gas environments and enable non-invasive diagnostics without affecting plasma characteristics are required. Currently, electrical diagnostic methods, such as Langmuir probes, are used in semiconductor process diagnostics; however, applying these methods in real process gas environments is challenging. Direct exposure to plasma raises concerns about contamination, corrosion, measurement errors due to process interferences, and stability. In this study, we employed a coplanar electrode sensor embedded within an electrostatic chuck (ESC) to prevent contamination and corrosion. By operating non-invasively within the ESC, this sensor enables real-time diagnostics of plasma conditions at the substrate level where the actual process occurs. Plasma density can be determined by measuring the capacitance change induced by the plasma discharge and calculating the corresponding change in charge. Results were compared with measurements using a single Langmuir probe (SLP)and optical emission spectroscopy (OES). The plasma density measured by the SLP was on average more than 15% higher than that measured by the capacitive diagnostic sensor under different RF power conditions. In addition, real-time comparison between the OES emission intensity and the plasma density measured by the capacitive diagnostic sensor was performed. Plasma was generated in a capacitively coupled plasma structure, and experiments were conducted by applying 13.56 MHz radio-frequency power. The proposed method offers significant implications for improving precision and automation in semiconductor and display fabrication, potentially enhancing production efficiency and quality.
Förderung
- Korea Evaluation Institute of Industrial Technology
Zitieren
APA
Lee, C. H., Kim, J. H., Cheon, H. S., Kim, J. H., Bang, I. Y., Lee, G. H., Shin, H. J., Jeong, Y. J., Kho, I. H., Heo, Y. J., Hwang, G. E., Cheon, Y. J., Ha, T. I., & Kwon, G. C. (2026). Capacitive diagnostic sensor embedded in an electrostatic chuck for real-time plasma density measurement. Measurement Science and Technology, 37(43), 435101. https://doi.org/10.1088/1361-6501/aeb27d
Vancouver
Lee CH, Kim JH, Cheon HS, Kim JH, Bang IY, Lee GH, et al. Capacitive diagnostic sensor embedded in an electrostatic chuck for real-time plasma density measurement. Measurement Science and Technology. 2026;37(43):435101. doi:10.1088/1361-6501/aeb27d
BibTeX
@article{Lee2026,
author = {Lee, Chang Hee and Kim, Jae Hyeon and Cheon, Hee Sam and Kim, Ji Hwan and Bang, In Young and Lee, Gwang Ho and Shin, Hyo Jong and Jeong, Yoon Joo and Kho, In Hyeok and Heo, Yu Jin and Hwang, Ga Eun and Cheon, Ye Jun and Ha, Tae In and Kwon, Gi Chung},
title = {Capacitive diagnostic sensor embedded in an electrostatic chuck for real-time plasma density measurement},
journal = {Measurement Science and Technology},
year = {2026},
volume = {37},
number = {43},
pages = {435101},
doi = {10.1088/1361-6501/aeb27d}
}
EUVIMED