Measurement-driven rotor test design and structural improvement for labyrinth seal rubbing in compact high-speed rotor systems
Measurement Science and Technology · 14.08.2026 · 37 (32) · 325901
DOI: 10.1088/1361-6501/ae8bcf ↗Kurz gefasst
Fachartikel in der Zeitschrift Measurement Science and Technology, online erschienen am 10.08.2026. Verfasst von Hongyu Li und 6 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Basic Research Program of Jiangsu.
Abstract (Originalsprache)
Compact high-speed rotor-bearing-seal systems are widely used in turbomachinery and compact power units, where small seal clearances, high rotational speeds, and strong rotor-support coupling make rubbing faults difficult to detect and trace during integrated testing. To address the measurement and fault-tracing challenges associated with labyrinth seal rubbing, this study proposes a simplified rotor test scheme based on equivalent dynamic characteristics. The actual bearing components are retained to reproduce the main support boundary conditions, while the rotor structure is simplified to enable independent high-speed testing. Multi-point displacement sensors and acceleration sensors are used to measure the rotor vibration response. Short-time Fourier transform analysis and cubic polynomial fitting are then combined to reconstruct the rotor deflection trend and estimate the vibration amplitude at the labyrinth seal position. The results show that severe rubbing occurred near the rear bearing labyrinth when the rotational speed reached approximately 34 000 RPM. The estimated vibration amplitude at this location exceeded the design clearance and increased significantly with the distance from the bearing support. Numerical simulation and experimental analysis indicate that the dominant cause of the fault in the present case was the insufficient clearance margin caused by excessive local vibration amplitude at the original rear labyrinth position. After shifting the labyrinth seal toward the bearing side, the rubbing-related vibration features were eliminated in the subsequent test. The proposed method provides a practical measurement-based route for fault tracing and structural improvement of compact high-speed rotor-bearing-seal systems.
Förderung
- National Natural Science Foundation of China
- Basic Research Program of Jiangsu
Zitieren
APA
Li, H., Wang, W., Liu, Z., He, J., Zhang, D., Li, Y., & Fei, Q. (2026). Measurement-driven rotor test design and structural improvement for labyrinth seal rubbing in compact high-speed rotor systems. Measurement Science and Technology, 37(32), 325901. https://doi.org/10.1088/1361-6501/ae8bcf
Vancouver
Li H, Wang W, Liu Z, He J, Zhang D, Li Y, et al. Measurement-driven rotor test design and structural improvement for labyrinth seal rubbing in compact high-speed rotor systems. Measurement Science and Technology. 2026;37(32):325901. doi:10.1088/1361-6501/ae8bcf
BibTeX
@article{Li2026,
author = {Li, Hongyu and Wang, Wenxiang and Liu, Zhan and He, Junzeng and Zhang, Dahai and Li, Yanbin and Fei, Qingguo},
title = {Measurement-driven rotor test design and structural improvement for labyrinth seal rubbing in compact high-speed rotor systems},
journal = {Measurement Science and Technology},
year = {2026},
volume = {37},
number = {32},
pages = {325901},
doi = {10.1088/1361-6501/ae8bcf}
}
EUVIMED