Analysis of motion characteristics of ball bearing with a complete dynamic model under velocity and load fluctuation conditions
Measurement Science and Technology · 08.05.2026 · 37 (19) · 196205
DOI: 10.1088/1361-6501/ae6471 ↗Kurz gefasst
Fachartikel in der Zeitschrift Measurement Science and Technology, online erschienen am 12.05.2026. Verfasst von Yu Tian und 4 weiteren Autor:innen. Die Arbeit nennt 51 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Ball bearings (BBs) are widely used support components in rotating machinery, and their performance under complex operating conditions directly affects system stability. In actual service, rotational velocity and load fluctuations can significantly alter internal contact states and disrupt the dynamic equilibrium of bearing components. However, classical dynamic models suffer from oversimplified configurations, calculated contact-lubrication effects and limited fluctuation simulation capacity, leading to the lack of an effective approach to capture transient motion variations and energy transmission of BB components under fluctuating conditions. To address this issue, a complete dynamic model of BBs considering oil lubrication is developed, featuring full degrees of freedom, coupling of Hertz contact and fluid dynamic pressure theories, and flexible multi-type fluctuation simulation. This model enables accurate analysis of transient relative displacements, velocities and contact forces of key BB components, and its accuracy is validated by comparing the numerically calculated cage dynamic response with published results. The motion characteristics of the inner ring, cage and balls, as well as the variation of their interactive forces, are investigated under steady-state conditions and typical velocity/load fluctuation patterns. The results show that compared with steady-state conditions, fluctuations in velocity and load reduce cage stability, expand the vibration range of inner ring, increase inter-component collision frequency and amplify impact forces. Notably, velocity fluctuations exert a more pronounced destabilizing effect on cage and ball motion, while ball-race contact forces are more susceptible to load fluctuations. This study provides a solid theoretical basis for maintaining the stability of rotating systems and analyzing BB failure mechanisms.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Tian, Y., Yan, C., Kang, J., Liu, Y., & Wu, L. (2026). Analysis of motion characteristics of ball bearing with a complete dynamic model under velocity and load fluctuation conditions. Measurement Science and Technology, 37(19), 196205. https://doi.org/10.1088/1361-6501/ae6471
Vancouver
Tian Y, Yan C, Kang J, Liu Y, Wu L. Analysis of motion characteristics of ball bearing with a complete dynamic model under velocity and load fluctuation conditions. Measurement Science and Technology. 2026;37(19):196205. doi:10.1088/1361-6501/ae6471
BibTeX
@article{Tian2026,
author = {Tian, Yu and Yan, Changfeng and Kang, Jianxiong and Liu, Yaofeng and Wu, Lixiao},
title = {Analysis of motion characteristics of ball bearing with a complete dynamic model under velocity and load fluctuation conditions},
journal = {Measurement Science and Technology},
year = {2026},
volume = {37},
number = {19},
pages = {196205},
doi = {10.1088/1361-6501/ae6471}
}
EUVIMED