EUVIMEDEUVIMED entdecken
Crossref

Predicting surface roughness of overhang structures by registering and fusing sensing signals and morphology data in LPBF

Longchao Cao, Tao Zhang, Xufeng Huang, Yahui Zhang, Wang Cai, Jingchang Li

Measurement Science and Technology · 27.03.2026 · 37 (12) · 125601

DOI: 10.1088/1361-6501/ae540f ↗

Kurz gefasst

Fachartikel in der Zeitschrift Measurement Science and Technology, online erschienen am 30.03.2026. Verfasst von Longchao Cao und 5 weiteren Autor:innen. Die Arbeit nennt 51 Literaturangaben. Gefördert von: Hubei Provincial Department of Education Science and Technology Research, Natural Science Foundation of Hubei Province, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Surface roughness is critical for the quality of overhang structures manufactured by laser powder bed fusion (LPBF). In-situ monitoring of surface roughness is promising to improve the surface quality. However, the up-skin and down-skin of overhang structures are often covered with unmelted powder or dross, making it difficult to establish a reliable connection between monitoring signals and the surface roughness. To address this issue, a new spatial information (SI) method was proposed to register sensing signals to the monitoring print parts. Firstly, an off-axial in-situ monitoring system with a microphone and photodiode is developed to capture process signatures during the LPBF, and the SI is acquired by inferring the coordinates of the laser scanning path from temporal features in the optical signal. Then, the signal distribution maps were reconstructed by mapping signals to SI. Finally, the Gated Transformer Network was developed for predicting surface roughness within each small area of the printed parts (352 μm × 250 μm). The registered signals exhibited strong effectiveness in predicting the surface roughness. Additionally, the relationship between the registered signals from the sub-surface region, defined as the deposited zone within 0–1.16 mm below the overhanging surface, and the resulting surface roughness was evaluated. The results indicate that the model achieved optimal prediction accuracy when the signal width was set to 0.58 mm. This work first provides a new approach for evaluating the surface quality of complex geometries.

Förderung

  • Hubei Provincial Department of Education Science and Technology Research
  • Natural Science Foundation of Hubei Province
  • National Natural Science Foundation of China

Zitieren

APA

Cao, L., Zhang, T., Huang, X., Zhang, Y., Cai, W., & Li, J. (2026). Predicting surface roughness of overhang structures by registering and fusing sensing signals and morphology data in LPBF. Measurement Science and Technology, 37(12), 125601. https://doi.org/10.1088/1361-6501/ae540f

Vancouver

Cao L, Zhang T, Huang X, Zhang Y, Cai W, Li J. Predicting surface roughness of overhang structures by registering and fusing sensing signals and morphology data in LPBF. Measurement Science and Technology. 2026;37(12):125601. doi:10.1088/1361-6501/ae540f

BibTeX
@article{Cao2026,
  author = {Cao, Longchao and Zhang, Tao and Huang, Xufeng and Zhang, Yahui and Cai, Wang and Li, Jingchang},
  title = {Predicting surface roughness of overhang structures by registering and fusing sensing signals and morphology data in LPBF},
  journal = {Measurement Science and Technology},
  year = {2026},
  volume = {37},
  number = {12},
  pages = {125601},
  doi = {10.1088/1361-6501/ae540f}
}
Kostenlos starten →