EUVIMEDEUVIMED entdecken
Crossref

Research on a strained sensing optical cable based on rectangular structure and weak fiber Bragg grating array

Lina Yue, Jia Yu, Yimin Xu, Xihua Wang, Sheng Li, Jinpeng Jiang

Measurement Science and Technology · 27.03.2026 · 37 (12) · 125001

DOI: 10.1088/1361-6501/ae5322 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Measurement Science and Technology, online erschienen am 27.03.2026. Verfasst von Lina Yue und 5 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 31 Literaturangaben. Gefördert von: Novel intelligent monitoring paradigm for suspension & connecting bridges via FBG array full-field sensing technology, Key Research and Development Program of Hubei Province - Joint Project for Young Scientific and Technological Talents in “Intelligent Construction”, the Major Science and Technology Projects of Fujian Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the strain monitoring of high-traffic infrastructure, there is a growing demand for a strained sensing optical cable that provide high adaptability and accuracy without invasive installation. A rectangular structure optical fiber sensing cable based on weak fiber Bragg grating (wFBG) is proposed to satisfy these requirements in this research. The cable features a multilayer composite structure, consisting of an optical fiber inscribed with a dense array of wFBG and an outer protective layer made of either linear low-density polyethylene (LLDPE) or thermoplastic polyurethane. The rectangular geometry is designed to maximize surface contact, and thereby facilitate surface mounting. Two gluing methods are investigated, namely bonding with a carbon-fiber-reinforced polymer (CFRP) resin layer and fixation using 3 M™ double-sided adhesive tape. A theoretical strain transfer model is established to analyze the sensing performance, and experimental validation is conducted through a simply supported beam load test and hysteresis loop measurements. These results demonstrate that the LLDPE&CFRP configuration achieves the highest strain transfer efficiency of approximately 92.6%, with measurement errors below 3%. This configuration also exhibits the smallest hysteresis loop area, indicating superior elastic recovery and stable strain coupling. These characteristics highlight the potential of the proposed design as a reliable and high-performance solution for strain monitoring under complex installation and service conditions.

Förderung

  • Novel intelligent monitoring paradigm for suspension & connecting bridges via FBG array full-field sensing technology
  • Key Research and Development Program of Hubei Province - Joint Project for Young Scientific and Technological Talents in “Intelligent Construction”
  • the Major Science and Technology Projects of Fujian Province
  • National Natural Science Foundation of China

Zitieren

APA

Yue, L., Yu, J., Xu, Y., Wang, X., Li, S., & Jiang, J. (2026). Research on a strained sensing optical cable based on rectangular structure and weak fiber Bragg grating array. Measurement Science and Technology, 37(12), 125001. https://doi.org/10.1088/1361-6501/ae5322

Vancouver

Yue L, Yu J, Xu Y, Wang X, Li S, Jiang J. Research on a strained sensing optical cable based on rectangular structure and weak fiber Bragg grating array. Measurement Science and Technology. 2026;37(12):125001. doi:10.1088/1361-6501/ae5322

BibTeX
@article{Yue2026,
  author = {Yue, Lina and Yu, Jia and Xu, Yimin and Wang, Xihua and Li, Sheng and Jiang, Jinpeng},
  title = {Research on a strained sensing optical cable based on rectangular structure and weak fiber Bragg grating array},
  journal = {Measurement Science and Technology},
  year = {2026},
  volume = {37},
  number = {12},
  pages = {125001},
  doi = {10.1088/1361-6501/ae5322}
}
Kostenlos starten →