EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Electrostatic force method to determine flexure stiffness with an integrated fiber-optic displacement interferometer

Kumar Arumugam, Jonathan Cripe, Sven Schulze, Stephan Schlamminger, Gordon Shaw

Measurement Science and Technology · 23.01.2026 · 37 (3) · 035001

DOI: 10.1088/1361-6501/ae2afd ↗

Kurz gefasst

Fachartikel in der Zeitschrift Measurement Science and Technology, online erschienen am 07.01.2026. Verfasst von Kumar Arumugam und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

We have developed a miniature fused silica flexure-based reference spring which integrates a sphere-flat capacitive electrostatic actuator and a fiber optic displacement sensor to measure flexure stiffness as defined by Hooke’s law. The experimental method can be adapted for measurement traceable to physical constants. A separate calibration using a reference mass validates the measurement. The measured stiffness values from these methods are (45.65 ± 0.84) Nm −1 and (46.79 ± 0.93) Nm −1 , respectively. With a displacement measurement resolution of 40 pm, this reference spring can be used to calibrate forces as low as 2 nN. The instrument represents an important step towards providing a compact small mass and force reference with embedded metrology traceable to the International System of Units. This method can be applied to a variety of measurements, including calibration of atomic force microscope, instrumented indentation, photon pressure force measurements, and of reference masses.

Zitieren

APA

Arumugam, K., Cripe, J., Schulze, S., Schlamminger, S., & Shaw, G. (2026). Electrostatic force method to determine flexure stiffness with an integrated fiber-optic displacement interferometer. Measurement Science and Technology, 37(3), 035001. https://doi.org/10.1088/1361-6501/ae2afd

Vancouver

Arumugam K, Cripe J, Schulze S, Schlamminger S, Shaw G. Electrostatic force method to determine flexure stiffness with an integrated fiber-optic displacement interferometer. Measurement Science and Technology. 2026;37(3):035001. doi:10.1088/1361-6501/ae2afd

BibTeX
@article{Arumugam2026,
  author = {Arumugam, Kumar and Cripe, Jonathan and Schulze, Sven and Schlamminger, Stephan and Shaw, Gordon},
  title = {Electrostatic force method to determine flexure stiffness with an integrated fiber-optic displacement interferometer},
  journal = {Measurement Science and Technology},
  year = {2026},
  volume = {37},
  number = {3},
  pages = {035001},
  doi = {10.1088/1361-6501/ae2afd}
}
Kostenlos starten →