Physics-Based Optoelectronic Simulation of Geometry-Engineered Ge-on-Si SPADs for SWIR Photon Detection
Journal of Physics D: Applied Physics · 06.11.2026
DOI: 10.1088/1361-6463/aebede ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Physics D: Applied Physics, online erschienen am 06.11.2026. Verfasst von Liyu Liu und 10 weiteren Autor:innen. Gefördert von: National Natural Science Foundation of China, Natural Science Basic Research Program of Shaanxi Province.
Abstract (Originalsprache)
Ge-on-Si single-photon avalanche diodes (SPADs) are promising candidates for silicon-compatible short-wave infrared (SWIR) photon-counting arrays, but pixel scaling toward the 10-µm class intensifies the tradeoff among optical absorption, electric-field control, and defect-related dark-count generation. This work presents a physics-based optoelectronic simulation study of geometry-dependent field-absorption-breakdown-probability coupling in compact back-side-illuminated Ge-on-Si SPADs with geometry-engineered Ge absorbers. A process-inspired top-wide/bottom-narrow Ge absorber is used as a representative structure and compared with uniformly narrow and uniformly wide Ge absorber baselines under the same SACM stack, field-termination configuration, defect-parameter set, and illumination condition. The upper-wide Ge region enhances the optically active absorption volume, whereas the narrowed bottom Ge/Si interface and tapered Ge/SiO 2 boundary reduce the spatial overlap between defect-sensitive regions and high breakdown probability. Dark-count decomposition further clarifies the relative contributions of bulk generation, threading-dislocation-related generation, point-defect generation, and sidewall generation. At a 5% excess bias ratio, the top-wide/bottom-narrow structure is calculated to achieve an SPDE of 16.9% at 1310 nm and a DCR of 19.36 MHz. The corresponding NEP is reduced from 11.05 and 7.82 fW Hz -1/2 for the uniformly narrow and uniformly wide baselines, respectively, to 5.59 fW Hz -1/2 . Representative defect-and sidewall-parameter variations indicate that this NEP advantage is robust and does not rely on a single nominal defect-parameter set. These results provide a simulation-based physical guideline for absorber-geometry engineering in compact Ge-on-Si SPAD pixels and support future experimental validation and optimization.
Förderung
- National Natural Science Foundation of China
- Natural Science Basic Research Program of Shaanxi Province
Zitieren
APA
Liu, L., Wu, F., Su, C., Xu, Z., Li, S., Qiao, K., Liu, T., Yin, F., Wang, J., chang, Y., & Wang, X. (2026). Physics-Based Optoelectronic Simulation of Geometry-Engineered Ge-on-Si SPADs for SWIR Photon Detection. Journal of Physics D: Applied Physics. https://doi.org/10.1088/1361-6463/aebede
Vancouver
Liu L, Wu F, Su C, Xu Z, Li S, Qiao K, et al. Physics-Based Optoelectronic Simulation of Geometry-Engineered Ge-on-Si SPADs for SWIR Photon Detection. Journal of Physics D: Applied Physics. 2026. doi:10.1088/1361-6463/aebede
BibTeX
@article{Liu2026,
author = {Liu, Liyu and Wu, Fei and Su, Chang and Xu, Zefang and Li, Shuangquan and Qiao, Kai and Liu, Tianye and Yin, Fei and Wang, Jieying and chang, yu and Wang, Xing},
title = {Physics-Based Optoelectronic Simulation of Geometry-Engineered Ge-on-Si SPADs for SWIR Photon Detection},
journal = {Journal of Physics D: Applied Physics},
year = {2026},
doi = {10.1088/1361-6463/aebede}
}
EUVIMED