EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Admittance-matched multilayer design for high-performance transmittance-based infrared electrochromic thermal switching

Bimal Nepal, Cedric Silva, Jacob Hannah, Dip Dutta, Bikram Bhatia, Sergio B Mendes

Journal of Physics D: Applied Physics · 05.06.2026 · 59 (22) · 225304

DOI: 10.1088/1361-6463/ae71e4 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Physics D: Applied Physics, online erschienen am 05.06.2026. Verfasst von Bimal Nepal und 5 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: DARPA.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Dynamic modulation of thermal infrared (IR) radiation transmitted through electrochromic (EC) thin-film stacks enables control over radiative heat transfer in solid-state systems. Conventional solid-state EC devices, while effective in the visible spectrum, exhibit limited transmittance in the IR range. This limitation originates from free-carrier absorption in the conducting oxide electrodes, which are transparent in the visible spectrum but become highly absorptive and reflective in the IR. In this work, this limitation is addressed through the technique of matching the optical admittance of a multilayer EC stack to the admittance of the surrounding semi-infinite media (air and a silicon substrate), allowing enhanced IR transmittance despite the use of conductive yet IR-absorbing indium tin oxide (ITO) electrodes. An ITO/WO 3 /Ta 2 O 5 /NiO/ITO stack is designed using transfer-matrix-method (TMM) modeling, in which our experimentally determined optical constants are deployed to optimize individual layer thicknesses so that the total optical admittance of the stack approaches that of the incident medium, thereby suppressing reflection losses. In addition, the overall absorption losses of the multilayer stack are minimized by judiciously placing the absorptive layers of the conductive electrodes in regions of low electric field within the stack. The wavelength-dependent complex refractive indices of all constituent layers were experimentally determined using polarized, multi-angle Fourier-transform IR (FTIR) spectroscopy over the 3–10 µ m spectral range and incorporated directly into the optical design. The fabricated devices exhibit strong and broadband IR transmittance modulation across this spectral range, with wavelength-dependent optical modulation depths of approximately 50%–60% across 3–9 µ m for one admittance-matched design and exceeding 80% for an alternative design. The experimentally measured spectra are closely reproduced by the TMM calculations. These results establish a validated design strategy that integrates FTIR-based optical constant determination with admittance-matched multilayer modeling, providing a robust route for solid-state EC devices with enhanced IR transmittance control.

Förderung

  • DARPA

Zitieren

APA

Nepal, B., Silva, C., Hannah, J., Dutta, D., Bhatia, B., & Mendes, S. B. (2026). Admittance-matched multilayer design for high-performance transmittance-based infrared electrochromic thermal switching. Journal of Physics D: Applied Physics, 59(22), 225304. https://doi.org/10.1088/1361-6463/ae71e4

Vancouver

Nepal B, Silva C, Hannah J, Dutta D, Bhatia B, Mendes SB. Admittance-matched multilayer design for high-performance transmittance-based infrared electrochromic thermal switching. Journal of Physics D: Applied Physics. 2026;59(22):225304. doi:10.1088/1361-6463/ae71e4

BibTeX
@article{Nepal2026,
  author = {Nepal, Bimal and Silva, Cedric and Hannah, Jacob and Dutta, Dip and Bhatia, Bikram and Mendes, Sergio B},
  title = {Admittance-matched multilayer design for high-performance transmittance-based infrared electrochromic thermal switching},
  journal = {Journal of Physics D: Applied Physics},
  year = {2026},
  volume = {59},
  number = {22},
  pages = {225304},
  doi = {10.1088/1361-6463/ae71e4}
}
Kostenlos starten →