Femtosecond laser microfabrication of open Janus wettability channels on silicon for pump-free passive fluidic transport
Journal of Micromechanics and Microengineering · 13.11.2026
DOI: 10.1088/1361-6439/aec1ec ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Micromechanics and Microengineering, online erschienen am 13.11.2026. Verfasst von Byunghak Lee und 8 weiteren Autor:innen. Gefördert von: Incheon National University (International Cooperative) Research Grant in 2024.
Abstract (Originalsprache)
We report a femtosecond laser microfabrication strategy for creating open microfluidic channels on silicon substrates with programmable Janus wettability, defined as the coexistence of superhydrophilic (water contact angle, WCA ≈ 0°) transport channels and a superhydrophobic (WCA = 178.9°) background within a single silicon wafer. Three sequential steps are employed: (i) global femtosecond laser surface structuring (3.0 W, 10 mm s−1, 25 μm hatch spacing) to generate hierarchical micro/nanostructures including laser-induced periodic surface structures (LIPSS), yielding a superhydrophobic background of WCA = 178.9° after silanization; (ii) vapor-phase fluorinated silane functionalization; and (iii) digitally controlled selective laser re-irradiation (100 mm s−1) to define superhydrophilic open channel networks by locally modifying fluorinated surface species and micro/nanostructures, restoring WCA ≈ 0°. Channel depth is independently controlled from approximately 25.4 μm to complete through-ablation by adjusting the processing pass number under fixed laser power, scanning speed, and hatch spacing. The superhydrophobic state (WCA = 178.9°) remained near 179° over 3 years of laboratory storage, indicating long-term storage stability. A 3.3° roll-off angle was observed in five tests with 7.8 μL droplets. Two functional demonstrations are presented: (i) a bioinspired leaf-venation hierarchical channel network, operated with a glass cover placed over the channel region, achieving spontaneous capillary-driven propagation through three channel generations within 2.4s, with measured transport velocities of 21.7 ± 1.2, 14.8 ± 0.9, and 6.0 ± 0.5 mm s−1 for the main channel (G0), first-generation (G1), and second-generation (G2) branches, respectively, decreasing monotonically with narrowing channel width; and (ii) a fully open, traditional Korean pagoda (Dabotap)-inspired multi-inlet network enabling ten independently guided dye streams without visible lateral colour mixing over approximately 11s. This mask-free, digitally programmable laser-enabled approach is potentially compatible with future silicon microelectromechanical systems integration and provides a versatile platform for passive open microfluidics, autonomous fluid management, and lab-on-chip applications.
Förderung
- Incheon National University (International Cooperative) Research Grant in 2024
Zitieren
APA
Lee, B., Youn, K. I., Kim, B., Kim, Y., Lee, J. W., Park, J., Bae, Y. M., SONG, K. H., & Jeong, B. (2026). Femtosecond laser microfabrication of open Janus wettability channels on silicon for pump-free passive fluidic transport. Journal of Micromechanics and Microengineering. https://doi.org/10.1088/1361-6439/aec1ec
Vancouver
Lee B, Youn KI, Kim B, Kim Y, Lee JW, Park J, et al. Femtosecond laser microfabrication of open Janus wettability channels on silicon for pump-free passive fluidic transport. Journal of Micromechanics and Microengineering. 2026. doi:10.1088/1361-6439/aec1ec
BibTeX
@article{Lee2026,
author = {Lee, Byunghak and Youn, Kook In and Kim, Bomi and Kim, Younghyeon and Lee, Ji Woo and Park, Jinhyuk and Bae, Young Min and SONG, KWANG HOON and Jeong, Bosu},
title = {Femtosecond laser microfabrication of open Janus wettability channels on silicon for pump-free passive fluidic transport},
journal = {Journal of Micromechanics and Microengineering},
year = {2026},
doi = {10.1088/1361-6439/aec1ec}
}
EUVIMED