EUVIMEDEUVIMED entdecken
Crossref

H 2 and CO identification and concentration prediction using a pulse-driven MEMS gas sensor with multi-feature, multi-task learning

Yijun Liu, Wenxin Luo, Sihan Yin, Mingjie Li

Journal of Micromechanics and Microengineering · 01.11.2026 · 36 (11) · 115006

DOI: 10.1088/1361-6439/aebd9f ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Micromechanics and Microengineering, online erschienen am 13.11.2026. Verfasst von Yijun Liu und 3 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Metal-oxide-semiconductor (MOS) gas sensors are attractive for compact monitoring but remain constrained by cross-reactivity and reliance on steady-state measurements. Here, a suspended Cu–SnO 2 microelectromechanical systems chemiresistor was integrated with a multi-feature, multi-task temporal network for hydrogen (H 2 )/carbon monoxide (CO) identification and quantification. The heater cycled between approximately 90 °C for 0.8 s and 350 °C for 1.6 s at an average power of 19.8 mW. Currents recorded at 10 Hz during 200–900 ppm exposures were transformed into 4.8 s moving-average, Hilbert-envelope, and temporal-derivative channels. Sliding time windows were analyzed using a multi-scale convolutional neural network-squeeze-and-excitation-bidirectional long short-term memory architecture with attention-based classification and gas-specific regression heads. For separately acquired test sequences at 200 and 250 ppm, the three-model ensemble achieved classification accuracy of 99.95% and a gas-only mean absolute error of 25.79 ppm using a 12 s window with a 0.1 s stride in offline replay. These results demonstrate a compact, low-power approach to multi-task gas identification and concentration prediction using a single microsensor.

Zitieren

APA

Liu, Y., Luo, W., Yin, S., & Li, M. (2026). H 2 and CO identification and concentration prediction using a pulse-driven MEMS gas sensor with multi-feature, multi-task learning. Journal of Micromechanics and Microengineering, 36(11), 115006. https://doi.org/10.1088/1361-6439/aebd9f

Vancouver

Liu Y, Luo W, Yin S, Li M. H 2 and CO identification and concentration prediction using a pulse-driven MEMS gas sensor with multi-feature, multi-task learning. Journal of Micromechanics and Microengineering. 2026;36(11):115006. doi:10.1088/1361-6439/aebd9f

BibTeX
@article{Liu2026,
  author = {Liu, Yijun and Luo, Wenxin and Yin, Sihan and Li, Mingjie},
  title = {H 2 and CO identification and concentration prediction using a pulse-driven MEMS gas sensor with multi-feature, multi-task learning},
  journal = {Journal of Micromechanics and Microengineering},
  year = {2026},
  volume = {36},
  number = {11},
  pages = {115006},
  doi = {10.1088/1361-6439/aebd9f}
}
Kostenlos starten →