Scalable fabrication of microtextured hydrophobic surfaces via two-step wet etching of aluminum templates for air-layer-induced friction and drag reduction
Journal of Micromechanics and Microengineering · 01.08.2026 · 36 (8) · 085012
DOI: 10.1088/1361-6439/ae90b7 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Micromechanics and Microengineering, online erschienen am 19.08.2026. Verfasst von Jun Koo Choi und 3 weiteren Autor:innen. Die Arbeit nennt 46 Literaturangaben. Gefördert von: Korea Institute of Machinery and Materials, National Research Foundation of Kore.
Abstract (Originalsprache)
Microtextured hydrophobic surfaces can significantly reduce interfacial friction and hydrodynamic drag by trapping stable air pockets (Cassie–Baxter state) between surface features and the liquid. In this study, we present a low-cost and scalable method to fabricate microtextured polydimethylsiloxane (PDMS) surfaces via replication of aluminum molds produced by a simple two-step wet etching process, consisting of anisotropic etching followed by isotropic etching. The resulting PDMS surfaces exhibited irregular microstructures with surface roughness ranging from 4.3 to 5.1 µ m, high apparent contact angles up to 136.7°, and air-pocket coverage of up to 30.5%, enabling stable interfacial slip. Friction and drag characteristics were systematically evaluated using a custom dual-beam leaf flexure system and a rotating propeller setup. Compared with smooth PDMS, the microtextured surfaces achieved up to 70% reduction in friction at the solid–solid interface, 32% reduction at the solid–liquid interface, and 20% reduction in underwater drag. The drag-reduction performance remained stable over 120 h of continuous operation. These results demonstrate that microtextured surfaces reduce hydrodynamic resistance through air-layer-induced slip and delayed flow separation, providing a practical strategy for scalable drag-reducing surfaces.
Förderung
- Korea Institute of Machinery and Materials
- National Research Foundation of Kore
Zitieren
APA
Choi, J. K., Cha, Y., Kim, B. H., & Seo, Y. H. (2026). Scalable fabrication of microtextured hydrophobic surfaces via two-step wet etching of aluminum templates for air-layer-induced friction and drag reduction. Journal of Micromechanics and Microengineering, 36(8), 085012. https://doi.org/10.1088/1361-6439/ae90b7
Vancouver
Choi JK, Cha Y, Kim BH, Seo YH. Scalable fabrication of microtextured hydrophobic surfaces via two-step wet etching of aluminum templates for air-layer-induced friction and drag reduction. Journal of Micromechanics and Microengineering. 2026;36(8):085012. doi:10.1088/1361-6439/ae90b7
BibTeX
@article{Choi2026,
author = {Choi, Jun Koo and Cha, Yenna and Kim, Byeong Hee and Seo, Young Ho},
title = {Scalable fabrication of microtextured hydrophobic surfaces via two-step wet etching of aluminum templates for air-layer-induced friction and drag reduction},
journal = {Journal of Micromechanics and Microengineering},
year = {2026},
volume = {36},
number = {8},
pages = {085012},
doi = {10.1088/1361-6439/ae90b7}
}
EUVIMED