EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Two-photon printing of monolithic glass electrospray emitters with TPMS micro-architectures

Bryce Kingsley, Nikolaos Chalmpes, Stefan Bell, Zach Ulibarri, Emmanuel Giannelis, Sadaf Sobhani, Elaine Petro

Journal of Micromechanics and Microengineering · 01.07.2026 · 36 (7) · 075005

DOI: 10.1088/1361-6439/ae7f2c ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Micromechanics and Microengineering, online erschienen am 10.07.2026. Verfasst von Bryce Kingsley und 6 weiteren Autor:innen. Die Arbeit nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Defense Sciences Office, DARPA.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The performance of electrospray thrusters is limited by the precision and constraints of traditional emitter fabrication techniques, which often lack resolution, geometric flexibility, or material compatibility for optimal emitter design and fabrication. Here, we demonstrate a high-resolution additive manufacturing approach for fabricating monolithic fused-silica electrospray emitters using two-photon polymerization printing followed by thermal conversion. Triply-periodic-minimal-surface (TPMS) microporous structures were embedded within the emitter body to provide passive capillary transport of propellant to the emitter tip. Optical profilometry and electron microscopy confirm high geometric fidelity to the target design and uniform shrinkage of approximately 40% during thermal processing, with preservation of the TPMS architecture. Electrospray emission testing was performed with ionic liquid EMI-BF 4 propellant, demonstrating consistent emission across sequential voltage sweeps with onset voltages of 2.4–2.6 kV, linear current–voltage characteristics, and estimated single emitter thrust of 64 nN at specific impulse values exceeding 3000 s.

Förderung

  • Defense Sciences Office, DARPA

Zitieren

APA

Kingsley, B., Chalmpes, N., Bell, S., Ulibarri, Z., Giannelis, E., Sobhani, S., & Petro, E. (2026). Two-photon printing of monolithic glass electrospray emitters with TPMS micro-architectures. Journal of Micromechanics and Microengineering, 36(7), 075005. https://doi.org/10.1088/1361-6439/ae7f2c

Vancouver

Kingsley B, Chalmpes N, Bell S, Ulibarri Z, Giannelis E, Sobhani S, et al. Two-photon printing of monolithic glass electrospray emitters with TPMS micro-architectures. Journal of Micromechanics and Microengineering. 2026;36(7):075005. doi:10.1088/1361-6439/ae7f2c

BibTeX
@article{Kingsley2026,
  author = {Kingsley, Bryce and Chalmpes, Nikolaos and Bell, Stefan and Ulibarri, Zach and Giannelis, Emmanuel and Sobhani, Sadaf and Petro, Elaine},
  title = {Two-photon printing of monolithic glass electrospray emitters with TPMS micro-architectures},
  journal = {Journal of Micromechanics and Microengineering},
  year = {2026},
  volume = {36},
  number = {7},
  pages = {075005},
  doi = {10.1088/1361-6439/ae7f2c}
}
Kostenlos starten →