EUVIMEDEUVIMED entdecken
Crossref

Etch rate enhancement of a DRIE process for fabrication of silicon micropillar arrays

Alireza Pourhedayat Ganji, Seyed Ahmadreza Firoozabadi, Mohammadjavad Bouloorchi Tabalvandani, Mohammad Pourmand, Majid Badieirostami

Journal of Micromechanics and Microengineering · 01.05.2026 · 36 (5) · 055006

DOI: 10.1088/1361-6439/ae6fc7 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Micromechanics and Microengineering, online erschienen am 01.06.2026. Verfasst von Alireza Pourhedayat Ganji und 4 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents the etch rate enhancement of a deep reactive ion etching process for fabrication of silicon micropillar arrays, structures that play a critical role in the design of micro-electromechanical systems, photonic, plasmonic, and biomedical microdevices. By using (100)-oriented silicon wafers and chromium as the hardmask material for etching, we examined the effects of gas flow rates, etch/passivation cycle durations, and post-process cleaning methods on both etch rate and surface morphology. Particular attention was given to post-etch cleaning procedures, where both O₂ plasma and a mixture of O₂/SF₆ plasma treatments were evaluated for their abilities to mitigate micromasking and reduce grass formation. Process improvement focused on tuning SF 6 and H 2 flow rates during etching. Particularly, by introducing H₂ along with SF₆ into the etching cycle, plasma chemistry was adjusted through scavenging excess fluorine radicals by hydrogen ions. This adjustment reduced the isotropic component of the etch, diminished micromasking-induced defects, and improved verticality of the etched micropillars. By carefully adjusting these parameters, the etch rate was improved from 0.8 μ m min −1 to 1.5 μ m min −1 , while preserving the verticality and minimizing the undercut. Scanning electron microscopy and atomic force microscopy analyses confirmed significant improvements in sidewall smoothness, structural uniformity and reduction of surface roughness.

Zitieren

APA

Ganji, A. P., Firoozabadi, S. A., Tabalvandani, M. B., Pourmand, M., & Badieirostami, M. (2026). Etch rate enhancement of a DRIE process for fabrication of silicon micropillar arrays. Journal of Micromechanics and Microengineering, 36(5), 055006. https://doi.org/10.1088/1361-6439/ae6fc7

Vancouver

Ganji AP, Firoozabadi SA, Tabalvandani MB, Pourmand M, Badieirostami M. Etch rate enhancement of a DRIE process for fabrication of silicon micropillar arrays. Journal of Micromechanics and Microengineering. 2026;36(5):055006. doi:10.1088/1361-6439/ae6fc7

BibTeX
@article{Ganji2026,
  author = {Ganji, Alireza Pourhedayat and Firoozabadi, Seyed Ahmadreza and Tabalvandani, Mohammadjavad Bouloorchi and Pourmand, Mohammad and Badieirostami, Majid},
  title = {Etch rate enhancement of a DRIE process for fabrication of silicon micropillar arrays},
  journal = {Journal of Micromechanics and Microengineering},
  year = {2026},
  volume = {36},
  number = {5},
  pages = {055006},
  doi = {10.1088/1361-6439/ae6fc7}
}
Kostenlos starten →