Wet spinning manufacturing and mechanical-electrical properties investigation for thermoplastic polyurethane-carbon black flexible fibers
Journal of Micromechanics and Microengineering · 01.05.2026 · 36 (5) · 055003
DOI: 10.1088/1361-6439/ae634b ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Micromechanics and Microengineering, online erschienen am 06.05.2026. Verfasst von Xinghan Mi und 4 weiteren Autor:innen. Die Arbeit nennt 39 Literaturangaben. Gefördert von: Youth Innovation Technology Project of Higher School in Shandong Province, Key R&D Program of Shandong Province, China, National Natural Science Foundation of China.
Abstract (Originalsprache)
Flexible fibers prepared by wet spinning are widely used in smart fabrics, wearable devices and biomedical applications by virtue of their lightweight and flexible properties. In this study, the material system of thermoplastic polyurethane (TPU) and carbon black (CB) was used to achieve controlled fabrication of flexible fibers using wet spinning process, and its mechanical and electrical properties were investigated. Fiber diameter and body density were chosen as evaluation indices. The influences of needle size, extrusion rate, and solution concentration on fiber formation were examined through single-factor and response surface experiments, and the coupling effects of these three parameters on wet spinning behavior were summarized. TPU-CB fibers with diameters of 0.657–1.443 mm and densities of 0.247–0.466 g cm −3 were successfully prepared. This paper investigates the mechanical and electrical properties of fibers with different forming results. The basic influence laws of fiber diameter and body density on the properties such as elongation at break and electrical conductivity are obtained by analyzing the experimental results, which provide valuable guidance for the two-dimensional controllable manufacturing of forming results and mechanical-electrical properties of TPU-CB flexible fibers.
Förderung
- Youth Innovation Technology Project of Higher School in Shandong Province
- Key R&D Program of Shandong Province, China
- National Natural Science Foundation of China
Zitieren
APA
Mi, X., Zhang, N., Zong, X., Wang, J., & Zhang, C. (2026). Wet spinning manufacturing and mechanical-electrical properties investigation for thermoplastic polyurethane-carbon black flexible fibers. Journal of Micromechanics and Microengineering, 36(5), 055003. https://doi.org/10.1088/1361-6439/ae634b
Vancouver
Mi X, Zhang N, Zong X, Wang J, Zhang C. Wet spinning manufacturing and mechanical-electrical properties investigation for thermoplastic polyurethane-carbon black flexible fibers. Journal of Micromechanics and Microengineering. 2026;36(5):055003. doi:10.1088/1361-6439/ae634b
BibTeX
@article{Mi2026,
author = {Mi, Xinghan and Zhang, Nianqiang and Zong, Xuanjie and Wang, Jilai and Zhang, Chengpeng},
title = {Wet spinning manufacturing and mechanical-electrical properties investigation for thermoplastic polyurethane-carbon black flexible fibers},
journal = {Journal of Micromechanics and Microengineering},
year = {2026},
volume = {36},
number = {5},
pages = {055003},
doi = {10.1088/1361-6439/ae634b}
}
EUVIMED