EUVIMEDEUVIMED entdecken
Crossref

ALD alumina (Al 2 O 3 )-enabled wafer-level anodic bonding of LTCC and SOI for MEMS integration

Fikret Yildiz, Dogu Kaan Bugra Ozyigit, Muhammad Rashid Mahmood, Daisuke Nakamura, Günther Weidlinger, Julian Aumaier, Tobias Wernicke

Journal of Micromechanics and Microengineering · 01.04.2026 · 36 (4) · 045017

DOI: 10.1088/1361-6439/ae5e44 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Micromechanics and Microengineering, online erschienen am 29.04.2026. Verfasst von Fikret Yildiz und 6 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben. Gefördert von: TUBITAK.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The heterogeneous integration of functional substrates with vacuum-sealed microcavities remains a significant challenge in the fabrication of robust microelectromechanical systems (MEMS). Conventional fusion bonding requires elevated thermal budgets, which can compromise the integrity of temperature-sensitive device architectures. To overcome these limitations, this paper presents, to the best of our knowledge, for the first time, an atomic layer deposition alumina (Al 2 O 3 ) enabled wafer-level anodic bonding process for the integration of low-temperature co-fired ceramic (LTCC) and silicon-on-insulator (SOI) substrates. The bonding mechanism was first optimized at the chip level, where current–time analysis across 150 nm, 250 nm, and 300 nm interlayer thicknesses revealed that the bonding current is inversely proportional to the interlayer thickness. This optimized process was successfully scaled to wafer-level bonding using functional LTCC wafers (with electrical through vias and patterned cavities) and SOI wafers. In this architecture, the 150 nm Al 2 O 3 layer was selected as the optimal trade-off for balancing dielectric insulation and ionic conductivity. This interlayer plays a pivotal dual role, facilitating efficient ion migration for rapid bonding while exhibiting high dielectric breakdown. The bonding integrity and structural stability of the 12 µ m-thick suspended membranes over the MEMS cavities were comprehensively characterized using bonding current monitoring, scanning acoustic microscopy (SAM), and 3D surface profilometry. Quantitative yield analysis further demonstrated the high mechanical reliability of the integrated devices after dicing. This work establishes a high-performance, low-temperature alternative to conventional fusion-bonded cavity silicon-on-insulator (Cavity-SOI) architectures, offering a scalable pathway for next-generation integrated MEMS sensors.

Förderung

  • TUBITAK

Zitieren

APA

Yildiz, F., Ozyigit, D. K. B., Mahmood, M. R., Nakamura, D., Weidlinger, G., Aumaier, J., & Wernicke, T. (2026). ALD alumina (Al 2 O 3 )-enabled wafer-level anodic bonding of LTCC and SOI for MEMS integration. Journal of Micromechanics and Microengineering, 36(4), 045017. https://doi.org/10.1088/1361-6439/ae5e44

Vancouver

Yildiz F, Ozyigit DKB, Mahmood MR, Nakamura D, Weidlinger G, Aumaier J, et al. ALD alumina (Al 2 O 3 )-enabled wafer-level anodic bonding of LTCC and SOI for MEMS integration. Journal of Micromechanics and Microengineering. 2026;36(4):045017. doi:10.1088/1361-6439/ae5e44

BibTeX
@article{Yildiz2026,
  author = {Yildiz, Fikret and Ozyigit, Dogu Kaan Bugra and Mahmood, Muhammad Rashid and Nakamura, Daisuke and Weidlinger, Günther and Aumaier, Julian and Wernicke, Tobias},
  title = {ALD alumina (Al 2 O 3 )-enabled wafer-level anodic bonding of LTCC and SOI for MEMS integration},
  journal = {Journal of Micromechanics and Microengineering},
  year = {2026},
  volume = {36},
  number = {4},
  pages = {045017},
  doi = {10.1088/1361-6439/ae5e44}
}
Kostenlos starten →