EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Determining frequency-dependent moduli and residual stresses in parylene-C thin films using a microcantilever array

Yuanyuan Huang, Weileun Fang

Journal of Micromechanics and Microengineering · 01.04.2026 · 36 (4) · 045003

DOI: 10.1088/1361-6439/ae53f6 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Micromechanics and Microengineering, online erschienen am 02.04.2026. Verfasst von Yuanyuan Huang und 1 weiteren Autor:innen. Die Arbeit nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Council.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Parylene-C is a key thin-film material with broad applications in microelectromechanical systems. Its dynamic mechanical characteristics are critical for the design and performance of various devices. However, measuring the dynamic mechanical characteristics of thin films remains challenging due to their inherent viscoelasticity and the complexities involved in specimen preparation and testing methods. This study first develops fabrication processes for Parylene-C cantilever arrays, which are then utilized to establish a methodology for measuring the frequency-dependent mechanical parameters of Parylene-C thin films, including the storage modulus, loss modulus, and loss factor. The proposed approach integrates resonance testing, static tensile measurements, curve fitting techniques, and established theoretical models. Experimental results demonstrate that this method effectively characterizes the storage modulus, loss modulus, and loss factor of Parylene-C thin films across the transition from the rubbery to the glassy regime. The storage modulus in the rubbery and glassy regimes is approximately 2 GPa and 5.8 GPa, respectively. The glass transition angular frequency is identified to be approximately 5 × 10 4 rad s −1 . The proposed method can be extended to study the dynamic mechanical characteristics of other polymers. Furthermore, during the preparation of single-layer Parylene-C cantilever array, single-layer SiO 2 and Parylene-C/SiO 2 bimorph cantilevers were also fabricated using the same process. Thus, this study further utilizes these cantilevers to determine the uniform and gradient residual stresses in the Parylene-C thin film, which are found to be 10.8 MPa and 1.9 MPa, respectively.

Förderung

  • National Science and Technology Council

Zitieren

APA

Huang, Y., & Fang, W. (2026). Determining frequency-dependent moduli and residual stresses in parylene-C thin films using a microcantilever array. Journal of Micromechanics and Microengineering, 36(4), 045003. https://doi.org/10.1088/1361-6439/ae53f6

Vancouver

Huang Y, Fang W. Determining frequency-dependent moduli and residual stresses in parylene-C thin films using a microcantilever array. Journal of Micromechanics and Microengineering. 2026;36(4):045003. doi:10.1088/1361-6439/ae53f6

BibTeX
@article{Huang2026,
  author = {Huang, Yuanyuan and Fang, Weileun},
  title = {Determining frequency-dependent moduli and residual stresses in parylene-C thin films using a microcantilever array},
  journal = {Journal of Micromechanics and Microengineering},
  year = {2026},
  volume = {36},
  number = {4},
  pages = {045003},
  doi = {10.1088/1361-6439/ae53f6}
}
Kostenlos starten →