EUVIMEDEUVIMED entdecken
Crossref

Research on femtosecond laser direct writing-based thermally induced shrinkage process

Yu Xie, Yongkang Liu, Jianxiong Chen, Hui Chen, Shujin Hong

Journal of Micromechanics and Microengineering · 01.04.2026 · 36 (4) · 045001

DOI: 10.1088/1361-6439/ae4ef7 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Micromechanics and Microengineering, online erschienen am 01.04.2026. Verfasst von Yu Xie und 4 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Gefördert von: Fujian Provincial Regional Development Project, Natural Science Foundation of Fujian Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Femtosecond laser direct writing combined with thermally induced shrinkage offers a rapid and versatile approach for fabricating micro–nano optical devices. However, defects arising from both the femtosecond laser processing and the subsequent thermal shrinkage steps were observed during implementation. To address thermal-effect defects in polymer laser processing, a two-factor analysis of variance was performed. Both factors yielded p -values below the significance threshold ( α = 0.05), demonstrating that processing energy and scanning speed exert significant influences on thermal effects. The relationship between these parameters was established to preserve the morphological integrity of the fabricated structures. With the optimized laser processing parameters, the normalized polymer exhibits an average grayscale value of 100 ± 5 within the processed regions. Adhesion defects occurring during thermal shrinkage were mitigated by substituting the substrate material and optimizing the shrinkage temperature and duration. Using a glass substrate and heating at 140 °C for 15 min eliminated adhesion issues. To correct pattern distortion caused by anisotropic shrinkage along the X and Y axes, a reverse-design compensation method was introduced. Following compensation, the BOPS film retained its rectangular geometry after shrinkage, rather than deforming into a parallelogram. These results demonstrate a successful optimization of the femtosecond laser direct writing–based thermally induced shrinkage process and expand the potential of integrating femtosecond laser fabrication with thermally shrinkable materials for advanced micro–nano manufacturing applications.

Förderung

  • Fujian Provincial Regional Development Project
  • Natural Science Foundation of Fujian Province

Zitieren

APA

Xie, Y., Liu, Y., Chen, J., Chen, H., & Hong, S. (2026). Research on femtosecond laser direct writing-based thermally induced shrinkage process. Journal of Micromechanics and Microengineering, 36(4), 045001. https://doi.org/10.1088/1361-6439/ae4ef7

Vancouver

Xie Y, Liu Y, Chen J, Chen H, Hong S. Research on femtosecond laser direct writing-based thermally induced shrinkage process. Journal of Micromechanics and Microengineering. 2026;36(4):045001. doi:10.1088/1361-6439/ae4ef7

BibTeX
@article{Xie2026,
  author = {Xie, Yu and Liu, Yongkang and Chen, Jianxiong and Chen, Hui and Hong, Shujin},
  title = {Research on femtosecond laser direct writing-based thermally induced shrinkage process},
  journal = {Journal of Micromechanics and Microengineering},
  year = {2026},
  volume = {36},
  number = {4},
  pages = {045001},
  doi = {10.1088/1361-6439/ae4ef7}
}
Kostenlos starten →