EUVIMEDEUVIMED entdecken
Crossref

Diamond ICP-DRIE etching technology with PECVD SiO 2 as mask

Rui Tang, Jinwen Zhang, Jianyu Du, Wei Wang

Journal of Micromechanics and Microengineering · 28.11.2025 · 35 (11) · 115001

DOI: 10.1088/1361-6439/ae1483 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Micromechanics and Microengineering, online erschienen am 03.11.2025. Verfasst von Rui Tang und 3 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 20 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work proposes and develops an inductively coupled plasma reactive ion etching (ICP-DRIE) diamond etching technique using plasma-enhanced chemical vapor deposition (PECVD)-deposited SiO 2 as the etch mask. On a 300 μ m-thick polycrystalline diamond substrate, a 16.0 ± 0.3 μ m SiO 2 layer was deposited by PECVD and patterned using an Al hard mask. Both Al and SiO 2 hard masks were patterned via ICP-RIE. The ICP and bias powers were fixed, and the effects of different O 2 flow rates and chamber pressures on the diamond etch rate and SiO 2 mask selectivity were systematically investigated. Step profilometry was employed for accurate depth measurement, and scanning electron microscopy was used to observe the etched mesa morphology. The results show that the optimized ICP-DRIE recipe consists of an ICP power of 1600 W, a bias power of 100 W, an O 2 flow rate of 49 sccm, and a chamber pressure of 5 mTorr, achieving a diamond etch rate of 287.2 nm min −1 , a SiO 2 selectivity of 17.3, and a sidewall angle of 88.3° for 25 μ m-wide mesas. After 2 h of etching, the etch rate and selectivity were same as those after 20 min, but severe grass formation prevented further etching. It is estimated that a 16.0 μ m-thick SiO 2 mask can support a maximum diamond etch depth of up to 277 μ m. This study provides a new approach and reliable technical foundation for deep diamond etching.

Zitieren

APA

Tang, R., Zhang, J., Du, J., & Wang, W. (2025). Diamond ICP-DRIE etching technology with PECVD SiO 2 as mask. Journal of Micromechanics and Microengineering, 35(11), 115001. https://doi.org/10.1088/1361-6439/ae1483

Vancouver

Tang R, Zhang J, Du J, Wang W. Diamond ICP-DRIE etching technology with PECVD SiO 2 as mask. Journal of Micromechanics and Microengineering. 2025;35(11):115001. doi:10.1088/1361-6439/ae1483

BibTeX
@article{Tang2025,
  author = {Tang, Rui and Zhang, Jinwen and Du, Jianyu and Wang, Wei},
  title = {Diamond ICP-DRIE etching technology with PECVD SiO 2 as mask},
  journal = {Journal of Micromechanics and Microengineering},
  year = {2025},
  volume = {35},
  number = {11},
  pages = {115001},
  doi = {10.1088/1361-6439/ae1483}
}
Kostenlos starten →