Optical polymer aligner fabricated by 2pp for connecting angled fiber to an optical chip
Journal of Micromechanics and Microengineering · 31.10.2025 · 35 (10) · 105005
DOI: 10.1088/1361-6439/ae1144 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Micromechanics and Microengineering, online erschienen am 17.10.2025. Verfasst von A Rykov und 13 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 20 Literaturangaben. Gefördert von: Ministry of Education and Science of the Russian Federation.
Abstract (Originalsprache)
This work presents a method for assembling photonic integrated circuits (PICs) with angled fibers using 3D-printed polymer micro-connector aligners fabricated via two-photon polymerization (2PP). We demonstrate a scalable solution for the passive alignment of fiber arrays with grating couplers, addressing photonic circuit packaging challenges. Mechanical testing performed in the work confirmed the reliable adhesion of the polymer aligner to the SiO 2 chip surface material, with an average pull-off force of 0.3 N. The average insertion loss was −13 dB at a wavelength of 1550 nm. The tolerance analysis revealed that the micro-aligner limits misalignment along one axis ( Y ), providing initial positioning with an accuracy limited by the printer’s resolution and the fiber’s fabrication tolerance. We estimate this accuracy to be ±2 μ m, which significantly simplifies the subsequent fine alignment along the remaining degrees of freedom. A connection of an array of 5 fibers to the optical chip was achieved. The experimental results confirm the technology’s potential for R&D in applications requiring external fiber connections to PICs. Remaining challenges regarding array-level alignment accuracy are analyzed, and potential solutions are proposed.
Förderung
- Ministry of Education and Science of the Russian Federation
Zitieren
APA
Rykov, A., Asharchuk, I., Obydennov, D., Mumlyakov, A., Bitkov, M., Kungurtsev, E., Trofimov, I., Shibalov, M., Sokolov, S., Ponomarev, R., Vovk, N., Epifanov, E., Minaev, N., & Tarkhov, M. (2025). Optical polymer aligner fabricated by 2pp for connecting angled fiber to an optical chip. Journal of Micromechanics and Microengineering, 35(10), 105005. https://doi.org/10.1088/1361-6439/ae1144
Vancouver
Rykov A, Asharchuk I, Obydennov D, Mumlyakov A, Bitkov M, Kungurtsev E, et al. Optical polymer aligner fabricated by 2pp for connecting angled fiber to an optical chip. Journal of Micromechanics and Microengineering. 2025;35(10):105005. doi:10.1088/1361-6439/ae1144
BibTeX
@article{Rykov2025,
author = {Rykov, A and Asharchuk, I and Obydennov, D and Mumlyakov, A and Bitkov, M and Kungurtsev, E and Trofimov, I and Shibalov, M and Sokolov, S and Ponomarev, R and Vovk, N and Epifanov, E and Minaev, N and Tarkhov, M},
title = {Optical polymer aligner fabricated by 2pp for connecting angled fiber to an optical chip},
journal = {Journal of Micromechanics and Microengineering},
year = {2025},
volume = {35},
number = {10},
pages = {105005},
doi = {10.1088/1361-6439/ae1144}
}
EUVIMED