EUVIMEDEUVIMED entdecken
Crossref

On the design of a two-way piezoelectric MEMS microspeaker based on a multi-shape cantilever array for high-frequency applications

Yu-Chen Chen, Hsu-Hsiang Cheng, Ming-Ching Cheng, Sung-Cheng Lo, Chun-Kai Chan, Weileun Fang

Journal of Micromechanics and Microengineering · 01.07.2023 · 33 (7) · 074001

DOI: 10.1088/1361-6439/acceb1 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Micromechanics and Microengineering, online erschienen am 23.05.2023. Verfasst von Yu-Chen Chen und 5 weiteren Autor:innen. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 39 Literaturangaben. Gefördert von: National Science and Technology Council.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents the design and realization of a piezoelectric MEMS microspeaker for high-frequency enhancement. Based on piezoelectric thin film actuation, designs of cantilever diaphragms are conducted by modal analysis. Under a die size of 2.5 mm ( w ) × 5 mm ( l ) × 0.4 mm ( t ), the diaphragms are designed to include mid-range and tweeter units with regard to the balance of radiation area and sound pressure contribution. Furthermore, the out-of-phase driving of the proposed device can ensure that the superposition of the sound pressure level (SPL) is within the target frequency range (8–13 kHz) while reducing the SPL outside the target range. In pressure-field measurements, the proposed multi-shape cantilever array can produce high average SPL (91.6 dB) in the target frequency range from 8 kHz to 13 kHz and has a low total harmonic distortion (THD) of

Förderung

  • National Science and Technology Council

Zitieren

APA

Chen, Y., Cheng, H., Cheng, M., Lo, S., Chan, C., & Fang, W. (2023). On the design of a two-way piezoelectric MEMS microspeaker based on a multi-shape cantilever array for high-frequency applications. Journal of Micromechanics and Microengineering, 33(7), 074001. https://doi.org/10.1088/1361-6439/acceb1

Vancouver

Chen Y, Cheng H, Cheng M, Lo S, Chan C, Fang W. On the design of a two-way piezoelectric MEMS microspeaker based on a multi-shape cantilever array for high-frequency applications. Journal of Micromechanics and Microengineering. 2023;33(7):074001. doi:10.1088/1361-6439/acceb1

BibTeX
@article{Chen2023,
  author = {Chen, Yu-Chen and Cheng, Hsu-Hsiang and Cheng, Ming-Ching and Lo, Sung-Cheng and Chan, Chun-Kai and Fang, Weileun},
  title = {On the design of a two-way piezoelectric MEMS microspeaker based on a multi-shape cantilever array for high-frequency applications},
  journal = {Journal of Micromechanics and Microengineering},
  year = {2023},
  volume = {33},
  number = {7},
  pages = {074001},
  doi = {10.1088/1361-6439/acceb1}
}
Kostenlos starten →