EUVIMEDEUVIMED entdecken
Crossref

Exploration of the distribution of heavy metals in extracellular polymeric substances of sludge

Xuan Xu, Yuxin Wang, Miaomiao Zhao, Liying Wang, You Li, Ao Liu, Degang Ma iD

Environmental Technology · 2026

DOI: 10.1080/09593330.2026.2629045 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Environmental Technology, 2026. Verfasst von Xuan Xu und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Environmental Science and Engineering, Tianjin University, Tianjin, People's Republic of China. Hauptthemen laut MEDLINE: Sewage, Metals, Heavy, Extracellular Polymeric Substance Matrix, Water Pollutants, Chemical. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 54 Literaturangaben. Gefördert von: National Key research and development Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Due to the adsorption of heavy metals (HMs) onto extracellular polymeric substances (EPS) in dewatered sludge, the distribution of HMs among various EPS fractions remains unclear, thus impeding the advancement of efficient HM removal technologies. To investigate the persistence of EPS within sludge flocs following physical extraction and to determine the distribution of HMs in EPS, a systematic set of procedures and analytical tests were designed and implemented. The experimental results revealed a novel type of EPS, which is located closer to the cell wall and can be effectively extracted using chemical rather than physical methods. The phenomenon was elucidated through a combination of EPS extraction analysis, SEM analysis and soluble chemical oxygen demand (SCOD) analysis of the residual sludge following pretreatment with Ethylenediaminetetraacetic acid (EDTA) and citric acid (CA). A newly identified EPS fraction, termed chemical-extracted tightly bound EPS (C-TB-EPS), was observed, and 0.125 mol/L EDTA was determined to be the most appropriate extraction method for C-TB-EPS without causing significant disruption to the sludge flocs. Furthermore, the spatial distribution of HMs within EPS exhibited a distinct gradient, with their concentrations showing a marked increase in proximity to the cell wall. Quantitative analysis revealed that Zn, Ni, and Cu contributed 26.36%, 16.56%, and 0.51%, respectively, to the total HM inventory in the respective original sludge. The findings not only offer valuable insights into the spatial distribution and classification of EPS in dewatered sludge but also lay a foundation for further investigations into the development of HMs targeted removal strategies.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

SewageMetals, HeavyExtracellular Polymeric Substance MatrixWater Pollutants, ChemicalWaste Disposal, FluidEdetic AcidCitric Acid

Stichwörter der Autor:innen

Dewatered sludgeEPS extraction methodExtracellular polymeric substances (EPS)Heavy metalNear cell wall-EPS

Substanzen

SewageMetals, HeavyWater Pollutants, ChemicalEdetic AcidCitric Acid

Autor:innen und Institutionen

  • School of Environmental Science and Engineering, Tianjin University, Tianjin, People's Republic of China.
  • United Taize Environmental Technology Development Company Limited, Tianjin, People's Republic of China.

ORCID-Profile: Degang Ma

Förderung

  • National Key research and development Program of China

Zitieren

APA

Xu, X., Wang, Y., Zhao, M., Wang, L., Li, Y., Liu, A., & Ma, D. (2026). Exploration of the distribution of heavy metals in extracellular polymeric substances of sludge. Environmental Technology. https://doi.org/10.1080/09593330.2026.2629045

Vancouver

Xu X, Wang Y, Zhao M, Wang L, Li Y, Liu A, et al. Exploration of the distribution of heavy metals in extracellular polymeric substances of sludge. Environmental Technology. 2026. doi:10.1080/09593330.2026.2629045

BibTeX
@article{Xu2026,
  author = {Xu, Xuan and Wang, Yuxin and Zhao, Miaomiao and Wang, Liying and Li, You and Liu, Ao and Ma, Degang},
  title = {Exploration of the distribution of heavy metals in extracellular polymeric substances of sludge},
  journal = {Environmental Technology},
  year = {2026},
  doi = {10.1080/09593330.2026.2629045}
}
Kostenlos starten →