Transient charge-driven 3D conformal printing via pulsed-plasma impingement
Proceedings of the National Academy of Sciences · 28.05.2024 · 121 (22)
DOI: 10.1073/pnas.2402135121 ↗Kurz gefasst
Fachartikel in der Zeitschrift Proceedings of the National Academy of Sciences, online erschienen am 21.05.2024. Verfasst von Yu Jiang und 10 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Intelligent Manufacturing Equipment and Technology, Huazhong University of Science and Technology, Wuhan 430074, People's Rep…. Die Arbeit wurde bisher 43-mal zitiert (Crossref) und nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: MOST | National Key Research and Development Program of China (NKPs), MOST | National Natural Science Foundation of China (NSFC).
Abstract (Originalsprache)
Seamless integration of microstructures and circuits on three-dimensional (3D) complex surfaces is of significance and is catalyzing the emergence of many innovative 3D curvy electronic devices. However, patterning fine features on arbitrary 3D targets remains challenging. Here, we propose a facile charge-driven electrohydrodynamic 3D microprinting technique that allows micron- and even submicron-scale patterning of functional inks on a couple of 3D-shaped dielectrics via an atmospheric-pressure cold plasma jet. Relying on the transient charging of exposed sites arising from the weakly ionized gas jet, the specified charge is programmably deposited onto the surface as a virtual electrode with spatial and time spans of ~mm in diameter and ~μs in duration to generate a localized electric field accordantly. Therefore, inks with a wide range of viscosities can be directly drawn out from micro-orifices and deposited on both two-dimensional (2D) planar and 3D curved surfaces with a curvature radius down to ~1 mm and even on the inner wall of narrow cavities via localized electrostatic attraction, exhibiting a printing resolution of ~450 nm. In addition, several conformal electronic devices were successfully printed on 3D dielectric objects. Self-aligned 3D microprinting, with stacking layers up to 1400, is also achieved due to the electrified surfaces. This microplasma-induced printing technique exhibits great advantages such as ultrahigh resolution, excellent compatibility of inks and substrates, antigravity droplet dispersion, and omnidirectional printing on 3D freeform surfaces. It could provide a promising solution for intimately fabricating electronic devices on arbitrary 3D surfaces.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Intelligent Manufacturing Equipment and Technology, Huazhong University of Science and Technology, Wuhan 430074, People's Republic of China.
- Flexible Electronics Research Center, Huazhong University of Science and Technology, Wuhan 430074, People's Republic of China.
- State Key Laboratory of Electrical Insulation and Power Equipment, Xi'an Jiaotong University, Xi'an, Shaanxi 710049, People's Republic of China.
- Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan 430074, People's Republic of China.
ORCID-Profile: Yu Jiang, Dong Ye, Aokang Li, Bo Zhang, Wenhu Han, Xuechen Niu, Mingtao Zeng, Lianbo Guo, Guanjun Zhang, Zhouping Yin, YongAn Huang
Förderung
- MOST | National Key Research and Development Program of China (NKPs)
- MOST | National Natural Science Foundation of China (NSFC)
Zitieren
APA
Jiang, Y., Ye, D., Li, A., Zhang, B., Han, W., Niu, X., Zeng, M., Guo, L., Zhang, G., Yin, Z., & Huang, Y. (2024). Transient charge-driven 3D conformal printing via pulsed-plasma impingement. Proceedings of the National Academy of Sciences, 121(22). https://doi.org/10.1073/pnas.2402135121
Vancouver
Jiang Y, Ye D, Li A, Zhang B, Han W, Niu X, et al. Transient charge-driven 3D conformal printing via pulsed-plasma impingement. Proceedings of the National Academy of Sciences. 2024;121(22). doi:10.1073/pnas.2402135121
BibTeX
@article{Jiang2024,
author = {Jiang, Yu and Ye, Dong and Li, Aokang and Zhang, Bo and Han, Wenhu and Niu, Xuechen and Zeng, Mingtao and Guo, Lianbo and Zhang, Guanjun and Yin, Zhouping and Huang, YongAn},
title = {Transient charge-driven 3D conformal printing via pulsed-plasma impingement},
journal = {Proceedings of the National Academy of Sciences},
year = {2024},
volume = {121},
number = {22},
doi = {10.1073/pnas.2402135121}
}
EUVIMED