EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Physics of microscale freeform 3D printing of ice

Akash Garg, Feimo Yang, O Burak Ozdoganlar iD, Philip R LeDuc

Proceedings of the National Academy of Sciences · 23.07.2024 · 121 (30)

DOI: 10.1073/pnas.2322330121 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the National Academy of Sciences, online erschienen am 15.07.2024. Verfasst von Akash Garg und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Carnegie Mellon University, Pittsburgh, PA 15232. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: NIA NIH HHS.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ice is emerging as a promising sacrificial material in the rapidly expanding area of advanced manufacturing for creating precise 3D internal geometries. Freeform 3D printing of ice (3D-ICE) can produce microscale ice structures with smooth walls, hierarchical transitions, and curved and overhang features. However, controlling 3D-ICE is challenging due to an incomplete understanding of its complex physics involving heat transfer, fluid dynamics, and phase changes. This work aims to advance our understanding of 3D-ICE physics by combining numerical modeling and experimentation. We developed a 2D thermo-fluidic model to analyze the transition from layered to continuous printing and a 3D thermo-fluidic model for the oblique deposition, which enables curved and overhang geometries. Experiments are conducted and compared with model simulations. We found that high droplet deposition rates enable the continuous deposition mode with a sustained liquid cap on top of the ice, facilitating smooth geometries. The diameter of ice structures is controlled by the droplet deposition frequency. Oblique deposition causes unidirectional spillover of the liquid cap and asymmetric heat transfer at the freeze front, rotating the freeze front. These results provide valuable insights for reproducible 3D-ICE printing that could be applied across various fields, including tissue engineering, microfluidics, and soft robotics.

Schlagwörter

Stichwörter der Autor:innen

3D-ICEadditive manufacturingfreeform 3D printingwater ice phase change

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Carnegie Mellon University, Pittsburgh, PA 15232.
  • Department of Biomedical Engineering, Carnegie Mellon University, Pittsburgh, PA 15232.
  • Department of Material Science and Engineering, Carnegie Mellon University, Pittsburgh, PA 15232.
  • Neuroscience Institute, Carnegie Mellon University, Pittsburgh, PA 15232.
  • Department of Biological Sciences, Carnegie Mellon University, Pittsburgh, PA 15232.
  • Department of Computational Biology, Carnegie Mellon University, Pittsburgh, PA 15232.

ORCID-Profile: O Burak Ozdoganlar

Förderung

  • NIA NIH HHS

Zitieren

APA

Garg, A., Yang, F., Ozdoganlar, O. B., & LeDuc, P. R. (2024). Physics of microscale freeform 3D printing of ice. Proceedings of the National Academy of Sciences, 121(30). https://doi.org/10.1073/pnas.2322330121

Vancouver

Garg A, Yang F, Ozdoganlar OB, LeDuc PR. Physics of microscale freeform 3D printing of ice. Proceedings of the National Academy of Sciences. 2024;121(30). doi:10.1073/pnas.2322330121

BibTeX
@article{Garg2024,
  author = {Garg, Akash and Yang, Feimo and Ozdoganlar, O Burak and LeDuc, Philip R},
  title = {Physics of microscale freeform 3D printing of ice},
  journal = {Proceedings of the National Academy of Sciences},
  year = {2024},
  volume = {121},
  number = {30},
  doi = {10.1073/pnas.2322330121}
}
Kostenlos starten →