Ultrahigh toughness zirconia ceramics
Proceedings of the National Academy of Sciences · 04.07.2023 · 120 (27)
DOI: 10.1073/pnas.2304498120 ↗Kurz gefasst
Fachartikel in der Zeitschrift Proceedings of the National Academy of Sciences, online erschienen am 26.06.2023. Verfasst von Koji Matsui und 4 weiteren Autor:innen. Beteiligte Einrichtung: Next Generation Zirconia Social Cooperation Program, Institute of Engineering Innovation, The University of Tokyo, 113-8656 Bunkyo-ku, Tokyo, Japan. Die Arbeit wurde bisher 74-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Advanced Research Infrastructure for Materials and Nanotechnology, Grants-in-Aid for Scientific Reasearch (S), Grant-in-Aid for Scienticfic Reasearch on Innovative Aeas.
Abstract (Originalsprache)
The attainment of both high strength and toughness is the ultimate goal for most structural materials. Although ceramic material has been considered for use as a structural material due to its high strength and good chemical stability, it suffers from the limitation of low toughness. For instance, although Y 2 O 3 -stabilized tetragonal ZrO 2 polycrystals (Y-TZPs) exhibit remarkable toughness among ceramics due to their phase transformation toughening mechanism, this toughness is still much weaker than that of metals. Here, we report Y-TZP-based ceramic materials with toughnesses exceeding 20 MPa m 1/2 , which is comparable to those of metals, while maintaining strengths over 1,200 MPa. The superior mechanical properties are realized by reducing the phase stability of tetragonal zirconia by tailoring the microstructure and chemistry of the Y-TZP. The proposed ceramic materials can further advance the design and application of ceramic-based structural materials.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Next Generation Zirconia Social Cooperation Program, Institute of Engineering Innovation, The University of Tokyo, 113-8656 Bunkyo-ku, Tokyo, Japan.
- Institute of Engineering Innovation, The University of Tokyo, 113-8656 Bunkyo-ku, Tokyo, Japan.
- Inorganic Materials Research Laboratory, Tosoh Corporation, 746-8501 Shunan, Yamaguchi, Japan.
- Department of Materials Science and Engineering, School of Engineering, The University of Tokyo, 113-8656 Bunkyo-ku, Tokyo, Japan.
- Nanostructures Research Laboratory, Japan Fine Ceramics Center, 456-8587 Atsuta, Nagoya, Japan.
ORCID-Profile: Koji Matsui, Hidehiro Yoshida, Yuichi Ikuhara
Förderung
- Advanced Research Infrastructure for Materials and Nanotechnology
- Grants-in-Aid for Scientific Reasearch (S)
- Grant-in-Aid for Scienticfic Reasearch on Innovative Aeas
Zitieren
APA
Matsui, K., Hosoi, K., Feng, B., Yoshida, H., & Ikuhara, Y. (2023). Ultrahigh toughness zirconia ceramics. Proceedings of the National Academy of Sciences, 120(27). https://doi.org/10.1073/pnas.2304498120
Vancouver
Matsui K, Hosoi K, Feng B, Yoshida H, Ikuhara Y. Ultrahigh toughness zirconia ceramics. Proceedings of the National Academy of Sciences. 2023;120(27). doi:10.1073/pnas.2304498120
BibTeX
@article{Matsui2023,
author = {Matsui, Koji and Hosoi, Kohei and Feng, Bin and Yoshida, Hidehiro and Ikuhara, Yuichi},
title = {Ultrahigh toughness zirconia ceramics},
journal = {Proceedings of the National Academy of Sciences},
year = {2023},
volume = {120},
number = {27},
doi = {10.1073/pnas.2304498120}
}
EUVIMED