EUVIMEDEUVIMED entdecken
Crossref

Design and optimisation of multi-stage hydraulic fracturing in a horizontal well in a shale gas reservoir in the Cooper Basin, South Australia

Kunakorn Pokalai, Yang Fei, Maqsood Ahmad, Manouchehr Haghighi, Mary Gonzalez

The APPEA Journal · 30.06.2015 · 55 (1) · 1-14

DOI: 10.1071/aj14001 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The APPEA Journal, online erschienen am 30.06.2015. Verfasst von Kunakorn Pokalai und 4 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Multi-stage hydraulic fracturing in horizontal wells is a well-known technology and is a key mechanism for gas recovery from extremely low permeable shale gas reservoirs. Since Australia’s Cooper Basin has a more complex stress regime and higher temperatures when compared to US shale gas formations, the design and optimisation of this technology in the Cooper Basin has not been explored to the authors’ knowledge. The Murteree and Roseneath shale formations in the Cooper Basin are 8,500 ft in depth and have been targets for shale gas production by different oil and gas operators. Deeper zones are difficult to fracture, as fracture gradients are often above 1 psi/ft. In this study, 1D vertical mechanical earth modelling using petrophysical log data was developed. Then, the stress profile was tuned and validated using the minimum horizontal stress from a mini-frac test taken along a vertical well. A 3D hydraulic fracture simulation in a vertical well as developed as a pilot to select the best locations for horizontal drilling. The selection criteria for the best location included the stress regime, gas flow rate and fracture geometry. Then a multi-stage fracture treatment in a horizontal well was designed. A large number of cases were simulated based on different well lengths, stage spacing and the number of stages. The productivity index was selected as the objective function for the optimisation process. The best case finally was selected as the optimum multi-stage hydraulic fracturing in a horizontal well in the Cooper Basin.

Zitieren

APA

Pokalai, K., Fei, Y., Ahmad, M., Haghighi, M., & Gonzalez, M. (2015). Design and optimisation of multi-stage hydraulic fracturing in a horizontal well in a shale gas reservoir in the Cooper Basin, South Australia. The APPEA Journal, 55(1), 1-14. https://doi.org/10.1071/aj14001

Vancouver

Pokalai K, Fei Y, Ahmad M, Haghighi M, Gonzalez M. Design and optimisation of multi-stage hydraulic fracturing in a horizontal well in a shale gas reservoir in the Cooper Basin, South Australia. The APPEA Journal. 2015;55(1):1-14. doi:10.1071/aj14001

BibTeX
@article{Pokalai2015,
  author = {Pokalai, Kunakorn and Fei, Yang and Ahmad, Maqsood and Haghighi, Manouchehr and Gonzalez, Mary},
  title = {Design and optimisation of multi-stage hydraulic fracturing in a horizontal well in a shale gas reservoir in the Cooper Basin, South Australia},
  journal = {The APPEA Journal},
  year = {2015},
  volume = {55},
  number = {1},
  pages = {1--14},
  doi = {10.1071/aj14001}
}
Kostenlos starten →