EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Surface modification of aluminum hydroxide and its dispersion stability in two-component polyurethane adhesives for converter valve applications

Lu Yan, Zhihui Lin, Yufei Liu, Yibin Sun, Runqing Cai

AIP Advances · 01.11.2026 · 16 (11)

DOI: 10.1063/5.0360721 ↗

Kurz gefasst

Fachartikel in der Zeitschrift AIP Advances, online erschienen am 19.11.2026. Verfasst von Lu Yan und 4 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangdong Power Grid Company.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ultra-high voltage converter valve deoxygenation modules impose strict requirements on the dispersion stability and long-term hydrothermal resistance of polyurethane adhesives. In this study, aluminum hydroxide (ATH) was modified via a wet process using five modifiers, including siloxane, titanate, and stearic acid. The modification process was optimized by investigating reaction time, temperature, and modifier dosage. Fourier transform infrared, x-ray photoelectron spectroscopy, and x-ray diffraction results verified that modifiers were successfully grafted onto the ATH surface through chemical bonds, without changing its crystal structure. Surface modification effectively reduced particle agglomeration and improved dispersion of ATH. The optimized titanate-modified ATH-2 exhibited the best performance with a water contact angle of 95° and a sedimentation rate of only 8%. It showed excellent 30-day storage stability in both polyol and isocyanate components. The stabilization mechanisms were attributed to dynamic hydrogen bond networks and reversible weak coordination bonds. This study provides a feasible strategy for preparing high-stability ATH-filled polyurethane adhesives for power equipment applications.

Förderung

  • Guangdong Power Grid Company

Zitieren

APA

Yan, L., Lin, Z., Liu, Y., Sun, Y., & Cai, R. (2026). Surface modification of aluminum hydroxide and its dispersion stability in two-component polyurethane adhesives for converter valve applications. AIP Advances, 16(11). https://doi.org/10.1063/5.0360721

Vancouver

Yan L, Lin Z, Liu Y, Sun Y, Cai R. Surface modification of aluminum hydroxide and its dispersion stability in two-component polyurethane adhesives for converter valve applications. AIP Advances. 2026;16(11). doi:10.1063/5.0360721

BibTeX
@article{Yan2026,
  author = {Yan, Lu and Lin, Zhihui and Liu, Yufei and Sun, Yibin and Cai, Runqing},
  title = {Surface modification of aluminum hydroxide and its dispersion stability in two-component polyurethane adhesives for converter valve applications},
  journal = {AIP Advances},
  year = {2026},
  volume = {16},
  number = {11},
  doi = {10.1063/5.0360721}
}
Kostenlos starten →