Rapid fabrication of customizable laser-induced graphene microelectrode arrays
APL Electronic Devices · 01.12.2026 · 2 (4)
DOI: 10.1063/5.0354946 ↗Kurz gefasst
Fachartikel in der Zeitschrift APL Electronic Devices, online erschienen am 19.11.2026. Verfasst von Courtney Wilson und 3 weiteren Autor:innen. Die Arbeit nennt 75 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: New Zealand Ministry of Business, Innovation and Employment.
Abstract (Originalsprache)
Laser-induced graphene (LIG) electrodes fabricated by CO2 laser scribing have been widely utilized in bioelectronic and sensing applications due to their compatibility with flexible substrates and scalable, cleanroom-free production. The digitally programmable nature of this process enables rapid and customizable electrode patterning. However, the relatively large spot size of the CO2 laser limits fabrication resolution and prevents device miniaturization. Here, we report a novel dual-laser approach for the direct writing of high-resolution, multiplexed, and integrated LIG microelectrode arrays with tunable structural and electrochemical properties. LIG electrodes were fabricated by CO2 laser scribing of flexible polyimide (PI) films. Optimization of the laser power and scribing speed generated LIG electrode tracks with a low sheet resistance (19.2 ± 0.30 Ω sq−1). Raman spectroscopy and scanning electron microscopy confirmed the formation of a three-dimensional, porous graphene-like structure. Device miniaturization was achieved through femtosecond laser micromachining of the PI adhesive insulation layer, producing microelectrode openings with diameters of 20–60 μm. Cyclic voltammetry, differential pulse voltammetry, and electrochemical impedance spectroscopy (EIS) demonstrated a size-dependent enhancement in electrochemical performance. The 30 μm LIG microelectrodes exhibited low electrode-to-electrode and device-to-device variability in 1 kHz impedance (coefficients of variation = 3.13–6.17% and 2.52%, respectively), while maintaining their mechanical integrity, electrical conductivity, and electrochemical performance even after 100 bending cycles at 150° (5.31% ± 2.64% increase in 1 kHz impedance). The rapid, mask-free fabrication of customizable LIG microelectrode arrays highlights the potential of this CO2/fs-laser processing strategy for developing portable, wearable, and disposable electrochemical devices.
Förderung
- New Zealand Ministry of Business, Innovation and Employment
Zitieren
APA
Wilson, C., Low, J., Aguergaray, C., & Travas-Sejdic, J. (2026). Rapid fabrication of customizable laser-induced graphene microelectrode arrays. APL Electronic Devices, 2(4). https://doi.org/10.1063/5.0354946
Vancouver
Wilson C, Low J, Aguergaray C, Travas-Sejdic J. Rapid fabrication of customizable laser-induced graphene microelectrode arrays. APL Electronic Devices. 2026;2(4). doi:10.1063/5.0354946
BibTeX
@article{Wilson2026,
author = {Wilson, Courtney and Low, Jeffery and Aguergaray, Claude and Travas-Sejdic, Jadranka},
title = {Rapid fabrication of customizable laser-induced graphene microelectrode arrays},
journal = {APL Electronic Devices},
year = {2026},
volume = {2},
number = {4},
doi = {10.1063/5.0354946}
}
EUVIMED