Impact ionization coefficients and excess noise characteristics of quinary Al0.85Ga0.07In0.08As0.63Sb0.37 on InP
Applied Physics Letters · 16.11.2026 · 129 (20)
DOI: 10.1063/5.0354514 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Physics Letters, online erschienen am 18.11.2026. Verfasst von A. Rahman und 6 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Gefördert von: University of Texas at Arlington, Center for Integrated Nanotechnologies.
Abstract (Originalsprache)
Avalanche photodiodes (APDs) are crucial for realizing low-noise, high-gain detection technologies, such as single photon detection, imaging, sensing, and LiDAR systems. In this work, we report experimentally extracted impact ionization coefficients for quinary Al0.85Ga0.07In0.08As0.63Sb0.37 grown on an InP substrate at room temperature. Gain measurements on p+-i-n+ and n+-i-p+ devices and subsequent extraction of impact ionization coefficients reveal that the proposed quinary composition has a low k-value of 0.01–0.03 at an electric field range of 400–600 kV/cm. Excess noise was also measured on the same devices. Here, the noise measurements qualitatively support electron-dominated multiplication. They do not independently determine the numerical coefficient ratio. In addition, the current work highlights the low excess noise characteristics of the quinary material, which might be attributed to two distinct physical mechanisms. First, the incorporation of a large In atom into the cation sublattice of the quaternary AlGaAsSb system induces strain, which alters valence band degeneracy by enhancing p–d orbital hybrid mixing. Second, large group-V anions (As and Sb) introduce alloy scattering within the lattice, and the resultant potential perturbations primarily create a physical energy bottleneck for holes, reducing their ionization rate (β). These mechanisms remain qualitative hypotheses. We discuss Weibull–Fréchet ionization path length distributions as a possible framework for explaining the noise, without performing a Weibull–Fréchet fit in the present study. Observations from our experiments resulted in an excess noise factor of ∼2.5 (at a gain of ≈50) for the p+-i-n+ devices and ∼103 (at a gain of ≈3) for the n+-i-p+ devices. Our findings solidify the potential of quinary AlGaInAsSb as a promising material platform for next-generation, ultra-low-noise, high-gain APDs.
Förderung
- University of Texas at Arlington
- Center for Integrated Nanotechnologies
Zitieren
APA
Rahman, A., Radadiya, J., Zhao, Y., Zhao, S., Obafemi, D. O., David, J. P. R., & Lee, S. (2026). Impact ionization coefficients and excess noise characteristics of quinary Al0.85Ga0.07In0.08As0.63Sb0.37 on InP. Applied Physics Letters, 129(20). https://doi.org/10.1063/5.0354514
Vancouver
Rahman A, Radadiya J, Zhao Y, Zhao S, Obafemi DO, David JPR, et al. Impact ionization coefficients and excess noise characteristics of quinary Al0.85Ga0.07In0.08As0.63Sb0.37 on InP. Applied Physics Letters. 2026;129(20). doi:10.1063/5.0354514
BibTeX
@article{Rahman2026,
author = {Rahman, A. and Radadiya, J. and Zhao, Y. and Zhao, S. and Obafemi, D. O. and David, J. P. R. and Lee, S.},
title = {Impact ionization coefficients and excess noise characteristics of quinary Al0.85Ga0.07In0.08As0.63Sb0.37 on InP},
journal = {Applied Physics Letters},
year = {2026},
volume = {129},
number = {20},
doi = {10.1063/5.0354514}
}
EUVIMED