Cavity optomechanical magnetometer actuated by substrate bending
Applied Physics Letters · 26.10.2026 · 129 (17)
DOI: 10.1063/5.0354167 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Physics Letters, online erschienen am 30.10.2026. Verfasst von D. D. Florizone und 7 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Gefördert von: Natural Sciences and Engineering Research Council of Canada.
Abstract (Originalsprache)
We describe a magnetic field sensor based on a monolithic Fabry–Pérot cavity. The cavities were fabricated in a thin-film buckling process at one surface of a fused silica chip, and the chip was subsequently bonded to a giant magnetostrictive material. External magnetic fields drive flexural modes of the assembly and the associated bending stresses are efficiently mapped to changes in the cavity height, with enhanced response at kHz-range mechanical resonance frequencies. A key attribute of this platform is that the size of the transducing material is decoupled from the size of the optical cavity. The buckled cavity operates in low mode order and with moderate Q ∼ 103, providing a high optomechanical coupling coefficient while also enabling a straightforward tuned-to-slope readout technique. Peak sensitivity of ∼2 pT/Hz1/2 was achieved in an unshielded laboratory environment, limited by laser phase and electronics noise in the readout system. With future reductions in these noise sources, we predict that a broadband thermomechanical-noise-limited sensitivity in the ∼0.1 pT/Hz1/2 range is feasible.
Förderung
- Natural Sciences and Engineering Research Council of Canada
Zitieren
APA
Florizone, D. D., Rabuka, I. E., Hiltz, K. D., Grobbellaar, I., DeCorby, E. F., Chen, A., Scheuer, K. G., & DeCorby, R. G. (2026). Cavity optomechanical magnetometer actuated by substrate bending. Applied Physics Letters, 129(17). https://doi.org/10.1063/5.0354167
Vancouver
Florizone DD, Rabuka IE, Hiltz KD, Grobbellaar I, DeCorby EF, Chen A, et al. Cavity optomechanical magnetometer actuated by substrate bending. Applied Physics Letters. 2026;129(17). doi:10.1063/5.0354167
BibTeX
@article{Florizone2026,
author = {Florizone, D. D. and Rabuka, I. E. and Hiltz, K. D. and Grobbellaar, I. and DeCorby, E. F. and Chen, A. and Scheuer, K. G. and DeCorby, R. G.},
title = {Cavity optomechanical magnetometer actuated by substrate bending},
journal = {Applied Physics Letters},
year = {2026},
volume = {129},
number = {17},
doi = {10.1063/5.0354167}
}
EUVIMED