Influence of laser intensity and focal spot size on laser impulse in metal foils and transparent tamper targets
Journal of Applied Physics · 07.11.2026 · 140 (17)
DOI: 10.1063/5.0352752 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Applied Physics, online erschienen am 02.11.2026. Verfasst von Alamgir Mondal und 9 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Gefördert von: Defense Threat Reduction Agency, UC MulticampusResearch Programs and Initiatives Grant, Battelle.
Abstract (Originalsprache)
High-power laser ablation is used to study impulse and thermomechanical shock generation. Laser intensity and focal spot size play important roles in determining laser impulse, ablation pressure, and shock generation. Furthermore, confined laser ablation in the presence of transparent tamper on the target surface significantly enhances laser impulse. In this work, the effects of laser intensity and focal spot size on ablation pressure, shock generation, plasma density, and temperature in laser-produced plasmas from different targets are investigated. Plasma plumes were generated by focusing 1064 nm, 10 ns pulses from an Nd:YAG laser onto aluminum (Al) and titanium (Ti) metal foils, as well as transparent fused silica, lithium fluoride, and sapphire. Experiments were conducted over a laser-intensity range of approximately ∼1 × 109 − 1 × 1011 W/cm2, with focal spot sizes of 100 and 400 μm. For a fixed focal spot size and target material, increasing the laser intensity produced 1.5–2× larger plasma expansion and increased plasma density. Electron temperatures measured using EUV spectroscopy also increased with laser intensity and were higher for Ti than for Al. A larger focal spot size led to higher plasma density under otherwise identical laser-irradiation conditions, although the corresponding changes in electron temperature remained within experimental uncertainty. Plasma density and temperature measurements were benchmarked against FLASH radiation-hydrodynamics simulations under similar conditions. The simulated ablation pressure and shock-front depth also showed increasing trends with laser intensity, consistent with the density and temperature results. The electron temperatures and ablation pressures were further compared with predictions from Mora’s model at three intensities.
Förderung
- Defense Threat Reduction Agency
- UC MulticampusResearch Programs and Initiatives Grant
- Battelle
Zitieren
APA
Mondal, A., Dhirar, S., Dominesey, J., Garay, J. E., Joshi, T. R., Chapelle, P. L., Quinn, M., Polek, M. P., Harilal, S. S., & Beg, F. N. (2026). Influence of laser intensity and focal spot size on laser impulse in metal foils and transparent tamper targets. Journal of Applied Physics, 140(17). https://doi.org/10.1063/5.0352752
Vancouver
Mondal A, Dhirar S, Dominesey J, Garay JE, Joshi TR, Chapelle PL, et al. Influence of laser intensity and focal spot size on laser impulse in metal foils and transparent tamper targets. Journal of Applied Physics. 2026;140(17). doi:10.1063/5.0352752
BibTeX
@article{Mondal2026,
author = {Mondal, Alamgir and Dhirar, Shivam and Dominesey, Julia and Garay, J. E. and Joshi, T. R. and Chapelle, P. L. and Quinn, Matthew and Polek, Mathew P. and Harilal, Sivanandan S. and Beg, F. N.},
title = {Influence of laser intensity and focal spot size on laser impulse in metal foils and transparent tamper targets},
journal = {Journal of Applied Physics},
year = {2026},
volume = {140},
number = {17},
doi = {10.1063/5.0352752}
}
EUVIMED