EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Numerical investigation of rear wing aerodynamics with Gurney flap configurations in a Formula 1 car

Masud-Ur-Rahman Fahim, Md Abidur Rahman, Iffat Jahan, Daud Hasan, Md. Abdur Rahim Hera

AIP Advances · 01.08.2026 · 16 (8)

DOI: 10.1063/5.0352380 ↗

Kurz gefasst

Fachartikel in der Zeitschrift AIP Advances, online erschienen am 21.08.2026. Verfasst von Masud-Ur-Rahman Fahim und 4 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper aims to investigate the aerodynamic performance of the rear wing of a Formula 1 car using computational fluid dynamics. A two-dimensional numerical model of a multi-element rear wing was developed to determine the effect of airfoil selection, introduction of Gurney flaps, and flap deflection angle on aerodynamic loading (downforce and drag). Three airfoils (BE50, E423, and FX76MP120) were used as main wings combined with three airfoils (NACA2412, NACA4412, and NACA6412) that served as flaps, giving nine different combinations of rear wing configurations, which were evaluated at a freestream velocity of 90 ms−1. Simulations were carried out in ANSYS Fluent using the transition k-kl-ω turbulence model. Steady Reynolds-Averaged Navier–Stokes (RANS) solutions were used for the attached flow regimes (α≤50°), while unsteady RANS solutions were employed at extreme flap deflection angles (α≥55°) to address time-dependent flow separation and wake vortex shedding. These findings indicate that configurations employing the E423 main wing airfoil generate a higher lift coefficient than the other analyzed profiles. Among the tested combinations, the E423-NACA 6412 configuration produced the greatest aerodynamic downforce. Inclusion of a Gurney flap increases lift on all configurations, albeit accompanied by a corresponding increase in drag. A parametric study of flap deflection angles ranging from 25° to 60° shows that lift increases with flap deflection up to ∼55°, beyond which aerodynamic efficiency declines due to augmented adverse pressure gradients and the onset of flow separation. The results provide insight into the sectional aerodynamic behavior of the multi-element rear wing systems in high-speed motorsport applications. Since the analysis is based on two-dimensional simulations, the findings outline sectional aerodynamic patterns and not the aerodynamic performance of a finite-span rear wing as a whole.

Zitieren

APA

Fahim, M., Rahman, M. A., Jahan, I., Hasan, D., & Hera, M. A. R. (2026). Numerical investigation of rear wing aerodynamics with Gurney flap configurations in a Formula 1 car. AIP Advances, 16(8). https://doi.org/10.1063/5.0352380

Vancouver

Fahim M, Rahman MA, Jahan I, Hasan D, Hera MAR. Numerical investigation of rear wing aerodynamics with Gurney flap configurations in a Formula 1 car. AIP Advances. 2026;16(8). doi:10.1063/5.0352380

BibTeX
@article{Fahim2026,
  author = {Fahim, Masud-Ur-Rahman and Rahman, Md Abidur and Jahan, Iffat and Hasan, Daud and Hera, Md. Abdur Rahim},
  title = {Numerical investigation of rear wing aerodynamics with Gurney flap configurations in a Formula 1 car},
  journal = {AIP Advances},
  year = {2026},
  volume = {16},
  number = {8},
  doi = {10.1063/5.0352380}
}
Kostenlos starten →