EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Characteristics of grouting coal rock under different water–cement ratios: Analysis of microscopic pore parameters and macroscopic mechanical properties

Jianbin Liu, Xijian Li, Shoukun Chen, Ziyun Xiang

AIP Advances · 01.08.2026 · 16 (8)

DOI: 10.1063/5.0350784 ↗

Kurz gefasst

Fachartikel in der Zeitschrift AIP Advances, online erschienen am 20.08.2026. Verfasst von Jianbin Liu und 3 weiteren Autor:innen. Die Arbeit nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Guizhou Province Science and Technology Achievement Transformation Joint Fund Project, National Nature Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Grouting technology has evolved into a pivotal technique for ensuring the structural stability of rock mass engineering. To develop cement-based grouting materials tailored to complex rock mass engineering and enhance their stability and solidification-strengthening efficiency, this study systematically investigated the effect of w/c on slurry performance using ordinary Portland cement as the base material. Core properties, including setting time and compressive strength, were tested, coupled with microstructural characterization via x-ray photoelectron spectroscopy and low-temperature N2 adsorption. As the w/c ratio increases from 0.5:1 to 0.7:1, the initial setting time extends from 4 h 12 min 35 s to 6 h 13 min 12 s, the final setting time prolongs from 6 h 05 min 16 s to 11 h 12 min 44 s, and the elastic modulus decreases from 1.23 to 0.49 GPa. The results show that the optimized slurry with a w/c of 0.6:1 exhibits superior stability and curing strength, balanced elastic modulus and ductility, and a 109.42% higher uniaxial compressive strength than the raw rock sample. Microscopic analysis reveals that the high alkaline hydrolysis surface precipitation coupling mechanism forms a stable heterogeneous interface, rendering the slurry microstructure denser and more uniform with effectively filled pores. All tests were performed in triplicate, and the average values are reported. This study provides a grouting parameter optimization method suitable for complex rock stratum conditions, with significant engineering practicality and application value.

Förderung

  • The Guizhou Province Science and Technology Achievement Transformation Joint Fund Project
  • National Nature Science Foundation of China

Zitieren

APA

Liu, J., Li, X., Chen, S., & Xiang, Z. (2026). Characteristics of grouting coal rock under different water–cement ratios: Analysis of microscopic pore parameters and macroscopic mechanical properties. AIP Advances, 16(8). https://doi.org/10.1063/5.0350784

Vancouver

Liu J, Li X, Chen S, Xiang Z. Characteristics of grouting coal rock under different water–cement ratios: Analysis of microscopic pore parameters and macroscopic mechanical properties. AIP Advances. 2026;16(8). doi:10.1063/5.0350784

BibTeX
@article{Liu2026,
  author = {Liu, Jianbin and Li, Xijian and Chen, Shoukun and Xiang, Ziyun},
  title = {Characteristics of grouting coal rock under different water–cement ratios: Analysis of microscopic pore parameters and macroscopic mechanical properties},
  journal = {AIP Advances},
  year = {2026},
  volume = {16},
  number = {8},
  doi = {10.1063/5.0350784}
}
Kostenlos starten →