EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Functional gradient EP/BaTiO3 coatings enhancing AC surface flashover voltage of epoxy/Al2O3 spacer

Zhengyang Wu, Wenfeng Liao, Huaping Shan, Yunxuan Zhang, He Gao, Zhen Li

AIP Advances · 01.08.2026 · 16 (8)

DOI: 10.1063/5.0345922 ↗

Kurz gefasst

Fachartikel in der Zeitschrift AIP Advances, online erschienen am 03.08.2026. Verfasst von Zhengyang Wu und 5 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Shandong Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Surface flashover of the insulator triggers gas-insulated switchgear’s unpredictable failure and affects the reliability of the electrical system. However, most studies focus on material modification to reduce surface charge but fail to eliminate the electric field distortion caused by insulator geometry effects. To reduce the structural distortion and improve the AC flashover voltage of the insulator, functional gradient coatings are designed onto the epoxy spacer, coating layer parameters affecting electric field distortion are analyzed, and partial discharge and AC flashover measurements are conducted to verify the design rationality. It indicates that the surface electric field becomes uniform with increasing permittivity, number of layers, thickness, and reasonable height design. Then, a three-layer functional gradient scheme is fabricated onto an epoxy spacer with 0.5 mm coating thickness: 50 wt. % EP/BaTiO3–0.6 mm (height), 40 wt. % EP/BaTiO3–1.1 mm, and 30 wt. % EP/BaTiO3–13.3 mm. The maximum electric field of the design decreases by 54.06% compared to the uncoated sample, and the partial discharge frequency and quantity decrease. The AC surface flashover increases by 17.62% compared to the uncoated spacer, indicating the design effectively reduces field distortion. The findings lay a fundamental foundation for future advanced functional gradient material designs to regulate electric fields for other engineering applications.

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Shandong Province

Zitieren

APA

Wu, Z., Liao, W., Shan, H., Zhang, Y., Gao, H., & Li, Z. (2026). Functional gradient EP/BaTiO3 coatings enhancing AC surface flashover voltage of epoxy/Al2O3 spacer. AIP Advances, 16(8). https://doi.org/10.1063/5.0345922

Vancouver

Wu Z, Liao W, Shan H, Zhang Y, Gao H, Li Z. Functional gradient EP/BaTiO3 coatings enhancing AC surface flashover voltage of epoxy/Al2O3 spacer. AIP Advances. 2026;16(8). doi:10.1063/5.0345922

BibTeX
@article{Wu2026,
  author = {Wu, Zhengyang and Liao, Wenfeng and Shan, Huaping and Zhang, Yunxuan and Gao, He and Li, Zhen},
  title = {Functional gradient EP/BaTiO3 coatings enhancing AC surface flashover voltage of epoxy/Al2O3 spacer},
  journal = {AIP Advances},
  year = {2026},
  volume = {16},
  number = {8},
  doi = {10.1063/5.0345922}
}
Kostenlos starten →