Tunnel cross-section study for 600 km/h high-speed maglev trains based on passenger pressure comfort and pressure load
Physics of Fluids · 01.08.2026 · 38 (8)
DOI: 10.1063/5.0343827 ↗Kurz gefasst
Fachartikel in der Zeitschrift Physics of Fluids, online erschienen am 04.08.2026. Verfasst von Xiaohong Yuan und 5 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Gefördert von: Key Laboratory Open Project of the Ministry of Education, New Teacher Independent Innovatin Fund.
Abstract (Originalsprache)
To determine a reasonable tunnel cross-sectional area for a 600 km/h high-speed maglev train passing through a tunnel, this study adopts the shear stress transport k–ω turbulence model and the overset grid method to investigate the effects of tunnel cross-sectional area, tunnel length, and train body dynamic airtightness index on the internal and external pressure variations. The numerical method's dependability is proven using a moving model test. When the eight-car high-speed maglev train passes through the tunnel at 600 km/h, the external peak-to-peak pressure is highest in the middle carriages, whereas the internal peak-to-peak pressure increases from the head carriage to the tail carriage. In contrast, the average peak-to-peak internal pressure increases gradually from the head carriage to the tail carriage. For a single train passage, the 3 s internal pressure variation shows a non-monotonic trend of first increasing, then decreasing, and subsequently increasing again with increasing tunnel length, reaching its maximum at a tunnel length of 1350 m. This length can be regarded as the most unfavorable tunnel length for internal pressure variation. When the dynamic airtightness index is 40 s, the optimal cross-sectional areas of single-track and double-track tunnels determined based on pressure comfort requirements are 95 and 92 m2. Further considering the 12 kPa train body pressure load limit, the minimum required tunnel cross-sectional areas are 120 m2 for single-track tunnels and 132 m2 for double-track tunnels. The research findings can be used to give technical support and a physical foundation for the construction of ultra-high-speed maglev tunnels, as well as to investigate train-tunnel coupled aerodynamic theory.
Förderung
- Key Laboratory Open Project of the Ministry of Education
- New Teacher Independent Innovatin Fund
Zitieren
APA
Yuan, X., Tian, Y., Wang, J., Wang, Y., Liu, X., & Wang, J. (2026). Tunnel cross-section study for 600 km/h high-speed maglev trains based on passenger pressure comfort and pressure load. Physics of Fluids, 38(8). https://doi.org/10.1063/5.0343827
Vancouver
Yuan X, Tian Y, Wang J, Wang Y, Liu X, Wang J. Tunnel cross-section study for 600 km/h high-speed maglev trains based on passenger pressure comfort and pressure load. Physics of Fluids. 2026;38(8). doi:10.1063/5.0343827
BibTeX
@article{Yuan2026,
author = {Yuan, Xiaohong and Tian, Yiming and Wang, Junyan and Wang, Yiping and Liu, Xun and Wang, Jiajie},
title = {Tunnel cross-section study for 600 km/h high-speed maglev trains based on passenger pressure comfort and pressure load},
journal = {Physics of Fluids},
year = {2026},
volume = {38},
number = {8},
doi = {10.1063/5.0343827}
}
EUVIMED