Transition control by means of various wavy surfaces in supersonic boundary layers
Physics of Fluids · 01.08.2026 · 38 (8)
DOI: 10.1063/5.0342116 ↗Kurz gefasst
Fachartikel in der Zeitschrift Physics of Fluids, online erschienen am 17.08.2026. Verfasst von Min Yu und 2 weiteren Autor:innen. Die Arbeit nennt 18 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Stable Support Program.
Abstract (Originalsprache)
The influence of wavy surfaces on the transition of a Mach 4.5 supersonic flat-plate boundary layer is investigated using direct numerical simulation and stability analysis. By systematically varying the shape and height of the wavy walls, this study reveals a strict hierarchy in their control mechanisms: the wavy wall height dictates the fundamental outcome (delay or acceleration), while the shape merely modulates the degree of delay. A critical height threshold is identified, restricting the height to approximately 0.1δ (δ is the local boundary layer thickness) that successfully delays transition, whereas exceeding 0.15δ invariably accelerates it. This reversal is attributed to contrasting disturbance dynamics: optimal heights not only effectively suppress the critical second-mode two-dimensional (2D) disturbance but also force three-dimensional (3D) modes that lack downstream self-sustainability and decay, whereas excessive heights fail to sustain this 2D suppression and trigger explosive downstream growth of both 3D and 2D modes. Within the optimal height range, specific geometric shapes (particularly dense 3D wavy walls and streamwise grooves) exhibit superior performance. Spectral analysis confirms that the wavy wall acts as a geometric filter, selectively exciting 3D modes strictly corresponding to its spanwise wavenumber. These findings provide a clear, physics-based guideline for designing effective wavy surfaces to delay supersonic boundary layer transition.
Förderung
- National Natural Science Foundation of China
- Stable Support Program
Zitieren
APA
Yu, M., Lou, H., & Zhang, S. (2026). Transition control by means of various wavy surfaces in supersonic boundary layers. Physics of Fluids, 38(8). https://doi.org/10.1063/5.0342116
Vancouver
Yu M, Lou H, Zhang S. Transition control by means of various wavy surfaces in supersonic boundary layers. Physics of Fluids. 2026;38(8). doi:10.1063/5.0342116
BibTeX
@article{Yu2026,
author = {Yu, Min and Lou, Hao and Zhang, Shiyuan},
title = {Transition control by means of various wavy surfaces in supersonic boundary layers},
journal = {Physics of Fluids},
year = {2026},
volume = {38},
number = {8},
doi = {10.1063/5.0342116}
}
EUVIMED