EUVIMEDEUVIMED entdecken
Crossref

Deep-subwavelength broadband underwater sound absorption: Modeling, optimization, and mechanism elucidation

Jiayu Wang, Yuanze Li, Xiang Yu, Badreddine Assouar, Siqi Ding, Yi-Qing Ni, Kai Zhou

Journal of Applied Physics · 07.07.2026 · 140 (1)

DOI: 10.1063/5.0339570 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Physics, online erschienen am 07.07.2026. Verfasst von Jiayu Wang und 6 weiteren Autor:innen. Die Arbeit nennt 50 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Low-frequency underwater noise absorption remains challenging because the large characteristic acoustic impedance and long wavelength in water make conventional porous/fibrous treatments impractical, while thermoviscous-loss-based resonant absorbers often suffer from weak intrinsic dissipation and narrowband performance. This work proposes a deep-subwavelength underwater absorber that combines two coupled folded-cavity extended-neck Helmholtz-resonator layers via a thin rubber damping interlayer, enabling either frequency-targeted strong absorption or bandwidth-enhanced performance within the same compact footprint. A unified lumped-impedance network model is developed for efficient design and optimization, using the Johnson–Champoux–Allard formulation as the representative thermoviscous neck model and retaining short-tube and thermoviscous-duct formulations as consistency checks. COMSOL-based single-neck thermoviscous benchmarks show that these formulations yield practically indistinguishable complex neck-impedance predictions in water over 20–1000 Hz for the investigated geometries. Guided by this validated model, SQP optimization produces representative frequency-targeted and broadband designs. The optimized absorbers achieve strong deep-subwavelength absorption in the 250–450 Hz range with total thicknesses of only 32–42 mm, while a broadband design with H = 52 mm maintains SAC > 0.5 over a several-hundred-Hz band within 619–968 Hz. In addition, the rubber interlayer provides additional resonance retuning toward lower frequencies and a pronounced bandwidth gain for coupled or multi-resonant configurations, offering a simple and manufacturable means of tailoring low-frequency and broadband underwater absorption.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Wang, J., Li, Y., Yu, X., Assouar, B., Ding, S., Ni, Y., & Zhou, K. (2026). Deep-subwavelength broadband underwater sound absorption: Modeling, optimization, and mechanism elucidation. Journal of Applied Physics, 140(1). https://doi.org/10.1063/5.0339570

Vancouver

Wang J, Li Y, Yu X, Assouar B, Ding S, Ni Y, et al. Deep-subwavelength broadband underwater sound absorption: Modeling, optimization, and mechanism elucidation. Journal of Applied Physics. 2026;140(1). doi:10.1063/5.0339570

BibTeX
@article{Wang2026,
  author = {Wang, Jiayu and Li, Yuanze and Yu, Xiang and Assouar, Badreddine and Ding, Siqi and Ni, Yi-Qing and Zhou, Kai},
  title = {Deep-subwavelength broadband underwater sound absorption: Modeling, optimization, and mechanism elucidation},
  journal = {Journal of Applied Physics},
  year = {2026},
  volume = {140},
  number = {1},
  doi = {10.1063/5.0339570}
}
Kostenlos starten →