EUVIMEDEUVIMED entdecken
Crossref

Erosion wear in helical coiled tubing for multi-branch fracturing sandblasting tools

Chunyan Kong, Guangli Liu, Jie Xia, Xiangtao Xiao, Xiaotong Liu, Yi Wang, Xian Wang

Physics of Fluids · 01.06.2026 · 38 (6)

DOI: 10.1063/5.0338930 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Physics of Fluids, online erschienen am 15.06.2026. Verfasst von Chunyan Kong und 6 weiteren Autor:innen. Die Arbeit nennt 42 Literaturangaben. Gefördert von: Key Laboratory of Oil and Gas Equipment,Ministry of Education, Xihua University Science and Technology Innovation Competition Project for Postgraduate Students.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The multi-branch zone fracturing sandblaster accommodates regional fracturing requirements, enabling fracturing across larger blocks and extended zones. To investigate erosion-wear characteristics of the coiled tubing (helical tube) in the tool's helical section and elucidate key influencing factors and mechanisms, numerical simulations were conducted based on erosion models and solid–liquid two-phase flow theory using computational fluid dynamics. This study analyzes the effects of flow field characteristics, sand-carrying fluid properties, pipe diameter, pitch, and spiral diameter on helical tube erosion wear. Based on the structural configuration and model parameters, results indicate that helical pipe erosion wear decreases with increasing pipe diameter, pitch, and helical diameter. In contrast, it intensifies with rising particle mass flow rate and inlet velocity of sand-carrying fluid. Additionally, erosion first increases and then decreases as particle size grows. Particle size significantly affects helical tubing erosion wear; as particle size increases, the maximum erosion rate rises first and then declines. From the coupling effects of fluid properties and structural features, large particle sizes make the inlet velocity a dominant factor for the erosion rate. Higher inlet velocity and mass flow rate lead to more severe erosion. With increased pipe and spiral diameters of helical tubing, the influence of particle size variation on erosion rate gradually weakens.

Förderung

  • Key Laboratory of Oil and Gas Equipment,Ministry of Education
  • Xihua University Science and Technology Innovation Competition Project for Postgraduate Students

Zitieren

APA

Kong, C., Liu, G., Xia, J., Xiao, X., Liu, X., Wang, Y., & Wang, X. (2026). Erosion wear in helical coiled tubing for multi-branch fracturing sandblasting tools. Physics of Fluids, 38(6). https://doi.org/10.1063/5.0338930

Vancouver

Kong C, Liu G, Xia J, Xiao X, Liu X, Wang Y, et al. Erosion wear in helical coiled tubing for multi-branch fracturing sandblasting tools. Physics of Fluids. 2026;38(6). doi:10.1063/5.0338930

BibTeX
@article{Kong2026,
  author = {Kong, Chunyan and Liu, Guangli and Xia, Jie and Xiao, Xiangtao and Liu, Xiaotong and Wang, Yi and Wang, Xian},
  title = {Erosion wear in helical coiled tubing for multi-branch fracturing sandblasting tools},
  journal = {Physics of Fluids},
  year = {2026},
  volume = {38},
  number = {6},
  doi = {10.1063/5.0338930}
}
Kostenlos starten →