Study on the fiber selection method and the microscopic mechanism of interfacial compatibility in crack-resistant epoxy/fiber composites based on interfacial properties
AIP Advances · 01.08.2026 · 16 (8)
DOI: 10.1063/5.0338036 ↗Kurz gefasst
Fachartikel in der Zeitschrift AIP Advances, online erschienen am 05.08.2026. Verfasst von Fei Yin und 7 weiteren Autor:innen. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Interfacial properties between epoxy resin (EP) and reinforcing fibers play a critical role in determining the crack resistance of epoxy/fiber composites, but the optimal selection of reinforcing fibers remains a significant challenge. In this study, a multiscale interfacial compatibility evaluation framework is established by combining molecular dynamics simulations with experimental methods. This framework integrates microscopic indicators, such as the solubility parameter, with macroscopic indicators, such as the coefficient of thermal expansion, to guide the selection of reinforcing fibers. Among the four reinforcing fibers investigated, namely, poly(p-phenylene terephthalamide), poly(m-phenylene isophthalamide), polyimide, and polyethylene terephthalate (PET), PET showed the best interfacial compatibility with EP. The EP/PET system had the lowest cohesive energy density, the smallest difference in solubility parameter, and the strongest intermolecular interactions. In addition, PET showed the best wettability with EP, and the corresponding composite also demonstrated relatively favorable thermophysical properties, including thermal conductivity. Thermal cycling aging results further revealed that the EP/PET composite possessed higher interfacial bonding strength and interfacial shear strength, together with a slower rate of interfacial degradation. Moreover, analysis of molecular simulation parameters, including interaction energy, revealed that the interfacial compatibility was predominantly governed by intermolecular van der Waals interactions. These results demonstrate the rationality of the proposed reinforcing fiber selection method and provide a theoretical basis for the constitutive design of crack-resistant epoxy composites.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Yin, F., Xing, Y., Liu, Y., Liu, Z., Mo, Y., Liu, Z., Liu, R., & Chen, X. (2026). Study on the fiber selection method and the microscopic mechanism of interfacial compatibility in crack-resistant epoxy/fiber composites based on interfacial properties. AIP Advances, 16(8). https://doi.org/10.1063/5.0338036
Vancouver
Yin F, Xing Y, Liu Y, Liu Z, Mo Y, Liu Z, et al. Study on the fiber selection method and the microscopic mechanism of interfacial compatibility in crack-resistant epoxy/fiber composites based on interfacial properties. AIP Advances. 2026;16(8). doi:10.1063/5.0338036
BibTeX
@article{Yin2026,
author = {Yin, Fei and Xing, Yue and Liu, Yun and Liu, Zhongxiang and Mo, Yang and Liu, Zeyang and Liu, Rui and Chen, Xingtian},
title = {Study on the fiber selection method and the microscopic mechanism of interfacial compatibility in crack-resistant epoxy/fiber composites based on interfacial properties},
journal = {AIP Advances},
year = {2026},
volume = {16},
number = {8},
doi = {10.1063/5.0338036}
}
EUVIMED