Development of high-performance microfluidic stabilizers via particle swarm optimization strategy
Review of Scientific Instruments · 01.11.2026 · 97 (11)
DOI: 10.1063/5.0337297 ↗Kurz gefasst
Fachartikel in der Zeitschrift Review of Scientific Instruments, online erschienen am 13.11.2026. Verfasst von Hao Sun und 3 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of High-Performance Precision Manufacturing, Dalian University of Technology, Dalian 116024, China. Die Arbeit nennt 35 Literaturangaben. Gefördert von: State Key Laboratory of Transient Chemical Effects and Control, China.
Abstract (Originalsprache)
Microfluidic stabilizers effectively suppress flow fluctuations and are, therefore, essential for peristaltic pump-driven microfluidic systems and high-precision instrumentation. Air-chamber-based passive microfluidic stabilizers are structurally simple, but their performance depends on multiple geometric parameters, making customized design challenging. To address these issues, this study proposes a particle-swarm-optimization-based optimization strategy to engineer the key structural parameters of a microfluidic stabilizer according to specific demands. A theoretical dynamic model is established to elucidate the stabilization mechanism and identify the key parameters governing device performance. Global optimization of the geometric parameters is then performed using particle swarm optimization, yielding an improved design with enhanced stabilization capability and practical manufacturability. The optimized device was fabricated and evaluated through instantaneous flow measurements at different flow rates and in intracranial pressure drainage simulations and droplet generation experiments. The results show that over the tested wide flow-rate range, the device achieves a flow pulsation suppression rate of more than 95%, reduces the flow fluctuation rate to less than 0.2%, and effectively attenuates pulsations above 0.1 Hz. These results confirm that the proposed optimization strategy effectively improves both stabilization performance and manufacturability, providing a complete design framework that integrates theoretical modeling, particle swarm optimization-based global optimization, and experimental validation for the rapid development of customized microfluidic stabilizers.
Autor:innen und Institutionen
- State Key Laboratory of High-Performance Precision Manufacturing, Dalian University of Technology, Dalian 116024, China.
- State Key Laboratory of Transient Chemical Effects and Control, Xi'an, Shanxi 710061, China.
- Key Laboratory for Micro/Nano Technology and System of Liaoning Province, Dalian University of Technology, Dalian 116024, Liaoning, China.
ORCID-Profile: Hao Sun, Rencong Mu, Mengxi Wu, Junshan Liu
Förderung
- State Key Laboratory of Transient Chemical Effects and Control, China
Zitieren
APA
Sun, H., Mu, R., Wu, M., & Liu, J. (2026). Development of high-performance microfluidic stabilizers via particle swarm optimization strategy. Review of Scientific Instruments, 97(11). https://doi.org/10.1063/5.0337297
Vancouver
Sun H, Mu R, Wu M, Liu J. Development of high-performance microfluidic stabilizers via particle swarm optimization strategy. Review of Scientific Instruments. 2026;97(11). doi:10.1063/5.0337297
BibTeX
@article{Sun2026,
author = {Sun, Hao and Mu, Rencong and Wu, Mengxi and Liu, Junshan},
title = {Development of high-performance microfluidic stabilizers via particle swarm optimization strategy},
journal = {Review of Scientific Instruments},
year = {2026},
volume = {97},
number = {11},
doi = {10.1063/5.0337297}
}
EUVIMED