EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

RSM-based optimization of multi-solid-waste self-activated muck grout: Properties, microstructural mechanisms, and engineering applications

Yifan Mao, Bo Wang, Shanlin Xu

AIP Advances · 01.07.2026 · 16 (7)

DOI: 10.1063/5.0337013 ↗

Kurz gefasst

Fachartikel in der Zeitschrift AIP Advances, online erschienen am 28.07.2026. Verfasst von Yifan Mao und 2 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To address the challenges of large-scale shield muck disposal and low-carbon requirements in grouting engineering, a multi-solid-waste self-activated muck grout was synthesized using industrial solid wastes, including carbide slag (CS), ground granulated blast-furnace slag (GGBS), and fly ash. Multivariate second-order response models correlating the binder-to-soil ratio (x1), CS-to-GGBS ratio (x2), FA-to-GGBS ratio (x3), and water adjustment coefficient (x4) with material properties were established via response surface methodology to quantify the effects of multi-component interactions on property development. The results indicate that the sustained alkali release from the CS effectively activates the reactivity of the precursors, achieving the self-activation of the binder system through the chemical complementarity among various solid wastes. Multi-objective optimization established the optimal mixture proportion that balances initial fluidity, mechanical strength, and impermeability as follows: x1 = 0.541, x2 = 0.295, x3 = 0.118, and x4 = 0.980. Under these conditions, the unconfined compressive strength at 7 d and the permeability coefficient of the hardened matrix reached 4.75 MPa and 4.77 × 10−8 cm/s, respectively. Microstructural characterization suggests that the generated C–(A)–S–H gels and ettringite inside the hardened matrix construct an interconnected binding skeleton through interlocking, promoting the refinement of coarse capillary pores (100–1000 nm) into fine gel pores (10–100 nm). This microstructural densification provides a plausible interpretation for the early stage impermeable barrier formation in the hardened matrix. This study provides a scientific basis for the targeted design of all-solid-waste grouting materials and the sustainable in situ recycling of shield tunnel muck.

Zitieren

APA

Mao, Y., Wang, B., & Xu, S. (2026). RSM-based optimization of multi-solid-waste self-activated muck grout: Properties, microstructural mechanisms, and engineering applications. AIP Advances, 16(7). https://doi.org/10.1063/5.0337013

Vancouver

Mao Y, Wang B, Xu S. RSM-based optimization of multi-solid-waste self-activated muck grout: Properties, microstructural mechanisms, and engineering applications. AIP Advances. 2026;16(7). doi:10.1063/5.0337013

BibTeX
@article{Mao2026,
  author = {Mao, Yifan and Wang, Bo and Xu, Shanlin},
  title = {RSM-based optimization of multi-solid-waste self-activated muck grout: Properties, microstructural mechanisms, and engineering applications},
  journal = {AIP Advances},
  year = {2026},
  volume = {16},
  number = {7},
  doi = {10.1063/5.0337013}
}
Kostenlos starten →