EUVIMEDEUVIMED entdecken
Crossref

Thermal elastohydrodynamic lubrication and subsurface stress in multilayer-coated angular contact ball bearings

Jiqiang Wu, Bingyang Yu, Shuhui Cui, Liqin Wang, Shengyuan Jiang, Xiangxu Meng, Zhen Li

Physics of Fluids · 01.06.2026 · 38 (6)

DOI: 10.1063/5.0336635 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Physics of Fluids, online erschienen am 22.06.2026. Verfasst von Jiqiang Wu und 6 weiteren Autor:innen. Die Arbeit nennt 41 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Multilayer coatings are widely used in modern mechanical equipment to prevent the tribopairs from surface wear and improve the fatigue life. This study develops a mixed thermal elastohydrodynamic lubrication model for a coated angular contact ball bearing, incorporating multilayer coatings on the raceway surface. The influence coefficients associated with elastic deformation and stress components in the multilayer contact problem are determined through frequency response functions. The correctness of the model is verified by comparing its results with available numerical results from the literature. Based on the dynamic characteristics analysis of bearings, the influences of multilayered gradient structure, gradient thickness, and gradient layer number on the lubrication characteristics of the bearing are investigated. Results show that the non-uniformly decreasing gradient structure provides the best surface lubrication performance at low speed, whereas the uniformly increasing gradient structure gives better comprehensive performance at high speed when both lubrication behavior and subsurface maximum shear stress are considered. The change rule of lubrication performance with the gradient thickness of different gradient structures is basically the same, and the greater the gradient thickness, the greater the difference between them. An increase in the number of gradient layers leads to a smoother and more homogeneous subsurface stress distribution, while exerting only a minor influence on the film thickness, pressure, temperature, and the magnitude of the maximum subsurface shear stress.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Wu, J., Yu, B., Cui, S., Wang, L., Jiang, S., Meng, X., & Li, Z. (2026). Thermal elastohydrodynamic lubrication and subsurface stress in multilayer-coated angular contact ball bearings. Physics of Fluids, 38(6). https://doi.org/10.1063/5.0336635

Vancouver

Wu J, Yu B, Cui S, Wang L, Jiang S, Meng X, et al. Thermal elastohydrodynamic lubrication and subsurface stress in multilayer-coated angular contact ball bearings. Physics of Fluids. 2026;38(6). doi:10.1063/5.0336635

BibTeX
@article{Wu2026,
  author = {Wu, Jiqiang and Yu, Bingyang and Cui, Shuhui and Wang, Liqin and Jiang, Shengyuan and Meng, Xiangxu and Li, Zhen},
  title = {Thermal elastohydrodynamic lubrication and subsurface stress in multilayer-coated angular contact ball bearings},
  journal = {Physics of Fluids},
  year = {2026},
  volume = {38},
  number = {6},
  doi = {10.1063/5.0336635}
}
Kostenlos starten →