Lubrication mechanisms and performance of micro-grooved water-lubricated bearings under cavitation–inertia coupling
Physics of Fluids · 01.05.2026 · 38 (5)
DOI: 10.1063/5.0335412 ↗Kurz gefasst
Fachartikel in der Zeitschrift Physics of Fluids, online erschienen am 27.05.2026. Verfasst von Xingyang Li und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 52 Literaturangaben. Gefördert von: Natural Science Foundation of Shandong Province, National Natural Science Foundation of China.
Abstract (Originalsprache)
Surface micro-grooves can effectively improve the lubrication performance of water-lubricated bearings, but the coupling mechanism between groove-induced cavitation and fluid inertia remains unclear. In this study, fluid inertia was further incorporated into a previously developed cavitation framework, and a coupled computational model was established by considering cavitation, fluid inertia, elastic deformation of the bearing liner, and surface roughness. The influence of micro-grooves on the lubrication performance of water-lubricated bearings was analyzed at both the single-groove and full-bearing levels. The results show that cavitation weakens local pressure build-up and reduces the load-carrying capacity of the bearing, whereas inertia enhances the local hydrodynamic effect near the groove edges through inertia-induced local flow redistribution. Under coupled conditions, cavitation suppresses the lubrication gain brought by inertia to some extent. Further parametric analysis indicates that the lubrication performance of micro-grooved water-lubricated bearings is sensitive to both operating and structural parameters. Within the present model and the investigated operating range, when the eccentricity ratio is 0.2, the micro-groove increases the bearing load-carrying capacity by ∼5.6%, and an appropriate combination of groove parameters helps achieve both load enhancement and friction reduction. The results indicate that the lubrication enhancement provided by micro-grooves is fundamentally governed by the competition between cavitation-induced degradation and inertia-related hydrodynamic enhancement, and may provide useful guidance for groove parameter optimization and engineering design.
Förderung
- Natural Science Foundation of Shandong Province
- National Natural Science Foundation of China
Zitieren
APA
Li, X., Li, D., Nie, T., Liu, Q., Xu, W., & Li, Q. (2026). Lubrication mechanisms and performance of micro-grooved water-lubricated bearings under cavitation–inertia coupling. Physics of Fluids, 38(5). https://doi.org/10.1063/5.0335412
Vancouver
Li X, Li D, Nie T, Liu Q, Xu W, Li Q. Lubrication mechanisms and performance of micro-grooved water-lubricated bearings under cavitation–inertia coupling. Physics of Fluids. 2026;38(5). doi:10.1063/5.0335412
BibTeX
@article{Li2026,
author = {Li, Xingyang and Li, Deao and Nie, Tao and Liu, Qianlu and Xu, Weiwei and Li, Qiang},
title = {Lubrication mechanisms and performance of micro-grooved water-lubricated bearings under cavitation–inertia coupling},
journal = {Physics of Fluids},
year = {2026},
volume = {38},
number = {5},
doi = {10.1063/5.0335412}
}
EUVIMED