A rectangular pulse Marx generator with an adjustable dead time drive circuit
Review of Scientific Instruments · 01.07.2026 · 97 (7)
DOI: 10.1063/5.0335100 ↗Kurz gefasst
Fachartikel in der Zeitschrift Review of Scientific Instruments, online erschienen am 01.07.2026. Verfasst von Jie Deng und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Information and Control Engineering, Southwest University of Science and Technology, Mianyang 621010, China. Die Arbeit nennt 27 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Sichuan Province, Doctoral Foundation of Southwest University of Science and Technology.
Abstract (Originalsprache)
A rectangular pulse Marx generator with an adjustable dead time (DT) drive circuit is presented. The proposed topology introduces a load-side discharge path to provide a controlled low-impedance route for removing the residual charge stored in the load-side parasitic capacitance during turn-off, thereby improving the falling-edge transition. Meanwhile, the series-connected discharge path structure prevents a single spurious turn-on event from directly forming a local low-impedance path, thereby reducing the probability of short-circuit path formation. To coordinate the discharge and charge switching actions, an RC-delay-based magnetic drive circuit is developed, enabling continuous DT adjustment from 0 to 200 ns. In addition, a resistor–capacitor–diode (RCD) voltage-balancing circuit is designed for the series-connected charging metal–oxide–semiconductor field-effect transistors. Experimental results show that the maximum voltage deviation from the ideal value is reduced from more than 66% to about 10%. An eight-stage prototype generates ∼5 kV from a 650 V input with a 20 kΩ load. Without the RCD voltage-balancing circuit, the measured rise and fall times are ∼48 and 72 ns, respectively. After introducing the RCD voltage-balancing circuit, the rise time increases to ∼60 ns due to the additional capacitance, while the fall time remains nearly unchanged. The output pulse width is continuously adjustable from 2 to 10 μs, and stable operation at 10 kHz is demonstrated. These results verify that the proposed generator is effective for reliable high-voltage rectangular pulse generation with adjustable DT and improved voltage balancing.
Autor:innen und Institutionen
- School of Information and Control Engineering, Southwest University of Science and Technology, Mianyang 621010, China.
- School of Physics, University of Electronic Science and Technology of China, Chengdu 611731, China.
ORCID-Profile: Jie Deng, Yuyu Zhu, Lu Zhang, Haoran Li, Yue Pan, Yuheng Gao, Shunqiang Wan
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Sichuan Province
- Doctoral Foundation of Southwest University of Science and Technology
- Fund of Key R&D projects in Sichuan Province
- Mianyang Central Guiding Local Science and Technology Development Fund Project
Zitieren
APA
Deng, J., Zhu, Y., Zhang, L., Li, H., Pan, Y., Gao, Y., & Wan, S. (2026). A rectangular pulse Marx generator with an adjustable dead time drive circuit. Review of Scientific Instruments, 97(7). https://doi.org/10.1063/5.0335100
Vancouver
Deng J, Zhu Y, Zhang L, Li H, Pan Y, Gao Y, et al. A rectangular pulse Marx generator with an adjustable dead time drive circuit. Review of Scientific Instruments. 2026;97(7). doi:10.1063/5.0335100
BibTeX
@article{Deng2026,
author = {Deng, Jie and Zhu, Yuyu and Zhang, Lu and Li, Haoran and Pan, Yue and Gao, Yuheng and Wan, Shunqiang},
title = {A rectangular pulse Marx generator with an adjustable dead time drive circuit},
journal = {Review of Scientific Instruments},
year = {2026},
volume = {97},
number = {7},
doi = {10.1063/5.0335100}
}
EUVIMED