EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhancement of corrosion resistance, hardness, and biosafety for martensitic stainless steel via laser thermal processing

Y. Tsutsumi, M. Shimabukuro, T. Manaka, M. Goto, M. Kaodowaki, T. Hashimoto, M. Kawashita, T. Ishimoto, H. Katayama

APL Materials · 01.05.2026 · 14 (5)

DOI: 10.1063/5.0334196 ↗

Kurz gefasst

Fachartikel in der Zeitschrift APL Materials, online erschienen am 11.05.2026. Verfasst von Y. Tsutsumi und 8 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Aluminium Research Center, University of Toyama, The Japan Institute of Metals and Materials, Japan Society for the Promotion of Science.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A laser thermal processing technique was used to efficiently improve the corrosion resistance of 420J2 martensitic stainless steel. The top layer of the steel plate was melted and immediately solidified by properly controlled laser irradiation. After the processing, the surfaces of the specimens were oxidized. The roughened oxidized layer that formed on the as-processed specimen was removed by grinding to expose the remelted layer. Potentiodynamic anodic polarization measurements confirmed that the remelted layer showed much better corrosion resistance. Furthermore, the hardness of the remelted layer increased to 700 HV. To evaluate the initial cell activity of the processed steel, osteoblast-like cell line (MC3T3-E1) was used. The initial proliferation of the cells was significantly improved on the laser-processed stainless steel. Therefore, laser thermal processing is a useful tool for developing novel materials with a combination of hardness, corrosion resistance, and cytocompatibility.

Förderung

  • Aluminium Research Center, University of Toyama
  • The Japan Institute of Metals and Materials
  • Japan Society for the Promotion of Science

Zitieren

APA

Tsutsumi, Y., Shimabukuro, M., Manaka, T., Goto, M., Kaodowaki, M., Hashimoto, T., Kawashita, M., Ishimoto, T., & Katayama, H. (2026). Enhancement of corrosion resistance, hardness, and biosafety for martensitic stainless steel via laser thermal processing. APL Materials, 14(5). https://doi.org/10.1063/5.0334196

Vancouver

Tsutsumi Y, Shimabukuro M, Manaka T, Goto M, Kaodowaki M, Hashimoto T, et al. Enhancement of corrosion resistance, hardness, and biosafety for martensitic stainless steel via laser thermal processing. APL Materials. 2026;14(5). doi:10.1063/5.0334196

BibTeX
@article{Tsutsumi2026,
  author = {Tsutsumi, Y. and Shimabukuro, M. and Manaka, T. and Goto, M. and Kaodowaki, M. and Hashimoto, T. and Kawashita, M. and Ishimoto, T. and Katayama, H.},
  title = {Enhancement of corrosion resistance, hardness, and biosafety for martensitic stainless steel via laser thermal processing},
  journal = {APL Materials},
  year = {2026},
  volume = {14},
  number = {5},
  doi = {10.1063/5.0334196}
}
Kostenlos starten →