A linear piezoelectric motor with self-lubricating frictional contact for scanning probe microscopy (SPM) precision positioning
Review of Scientific Instruments · 01.08.2026 · 97 (8)
DOI: 10.1063/5.0332975 ↗Kurz gefasst
Fachartikel in der Zeitschrift Review of Scientific Instruments, online erschienen am 12.08.2026. Verfasst von Zihao Li und 8 weiteren Autor:innen. Beteiligte Einrichtung: University of Science and Technology of China, Hefei, Anhui 230026, People's Republic of China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 49 Literaturangaben. Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China, Maintenance and Renovation Project for CAS Major Scientific and Technological Infrastructure.
Abstract (Originalsprache)
This work presents an ultra-compact linear piezoelectric motor (PM) for precision positioning in scanning probe microscopy (SPM). The motor consists of a 9-mm-long piezoelectric scanning tube (PST), a trapezoidal zirconia sliding shaft, and a customized beryllium–copper (BeCu) spring ring. The BeCu spring ring provides a stable radial preload and presses the zirconia shaft against the Au-coated inner wall of the PST, forming knife-edge contacts. Microscopic observations show that repeated axial sliding forms a relatively smooth and stable track at the contact interface, suggesting that this interface may help reduce direct wear and improve frictional stability during operation. The developed PM shows a threshold voltage of ∼30 V, a maximum travel range of about 5 mm, and a load-driving capacity exceeding 30 g at 90 V. In a simulated SPM coarse-approach procedure, no obvious parasitic displacement was observed under a 200 V probing waveform at 25 Hz for ∼2 h. Compared with reported piezoelectric-tube-based motors, the proposed PM shows a favorable combination of compact size, low threshold voltage, large travel range, and high load-driving capability. The motor was further used to construct a scanning tunneling microscope (STM), and atomic-resolution imaging of highly oriented pyrolytic graphite was obtained under ambient conditions. These results demonstrate that the proposed PM is suitable for compact SPM systems and other space-constrained nanopositioning applications.
Autor:innen und Institutionen
- University of Science and Technology of China, Hefei, Anhui 230026, People's Republic of China.
- Anhui Key Laboratory of Low-Energy Quantum Materials and Devices, High Magnetic Field Laboratory, HFIPS, Chinese Academy of Sciences, Hefei, Anhui 230031, People's Republic of China.
- The High Magnetic Field Laboratory of Anhui Province, Hefei, Anhui 230031, People's Republic of China.
- Anhui Laboratory of Advanced Photon Science and Technology, University of Science and Technology of China, Hefei, Anhui 230026, China.
- Hefei National Laboratory, University of Science and Technology of China, Hefei, Anhui 230026, People's Republic of China.
ORCID-Profile: Zihao Li, Shuai Dong, Jihao Wang, Wenjie Meng, Jing Zhang, Yubin Hou, Yalin Lu, Qingyou Lu
Förderung
- National Key Research and Development Program of China
- National Natural Science Foundation of China
- Maintenance and Renovation Project for CAS Major Scientific and Technological Infrastructure
Zitieren
APA
Li, Z., Dong, S., Feng, Q., Wang, J., Meng, W., Zhang, J., Hou, Y., Lu, Y., & Lu, Q. (2026). A linear piezoelectric motor with self-lubricating frictional contact for scanning probe microscopy (SPM) precision positioning. Review of Scientific Instruments, 97(8). https://doi.org/10.1063/5.0332975
Vancouver
Li Z, Dong S, Feng Q, Wang J, Meng W, Zhang J, et al. A linear piezoelectric motor with self-lubricating frictional contact for scanning probe microscopy (SPM) precision positioning. Review of Scientific Instruments. 2026;97(8). doi:10.1063/5.0332975
BibTeX
@article{Li2026,
author = {Li, Zihao and Dong, Shuai and Feng, Qiyuan and Wang, Jihao and Meng, Wenjie and Zhang, Jing and Hou, Yubin and Lu, Yalin and Lu, Qingyou},
title = {A linear piezoelectric motor with self-lubricating frictional contact for scanning probe microscopy (SPM) precision positioning},
journal = {Review of Scientific Instruments},
year = {2026},
volume = {97},
number = {8},
doi = {10.1063/5.0332975}
}
EUVIMED